Wraparound Extension Drawings in Hillingdon
Fixed-fee, MCIAT-chartered wraparound extension drawings for Hillingdon homeowners — London Borough of Hillingdon validation and local constraints handled from the start.
Hillingdon is Metro-land in built form: rows of interwar semi-detached and detached houses across Ruislip, Eastcote and Ickenham that lend themselves to hip-to-gable and dormer loft conversions and rear extensions, set against the historic timber-framed core of Ruislip Village and the Colne Valley green belt to the west. These abundant Metro-land semis often retain fuller permitted development rights than inner-London terraces, so a loft or single-storey rear frequently qualifies within the volume limits, though the right route always depends on the plot and its designation.
Unlike much of London, the London Borough of Hillingdon has no borough-wide Article 4 direction affecting typical householder permitted development. The binding constraints are different: Colne Valley green-belt policy toward the western edge and Harefield restricts scale, assessing extensions against strict limits on disproportionate additions to the original dwelling. Conservation control applies in Ruislip Village, Uxbridge (Windsor Street), Northwood, Ickenham Village, Harefield and Eastcote, where permitted development is removed. Toward the south of the borough near Heathrow, aircraft-noise considerations can influence habitable-room and glazing design and need evidencing within the application.
We prepare Hillingdon planning drawings that respect the established Metro-land building line the council expects, checking permitted development eligibility for semi-detached and detached homes first and flagging any conservation, green-belt or aircraft-noise constraint for your address. You get a fixed fee agreed up front, the same council-accepted drawings an architect would produce for usually around 30% less, a roughly seven-day drawing turnaround and free redraws until Hillingdon approves. Most householder applications are determined within the statutory eight weeks once validated, so we work to the council's validation checklist to head off the queries that cause delay.
Planning in Hillingdon: what to know before you apply
Hillingdon has no borough-wide Article 4 direction affecting typical householder permitted development; the binding constraints are Colne Valley green-belt policy to the west, conservation-area control in Ruislip, Uxbridge, Ickenham and Northwood, and aircraft-noise considerations near Heathrow to the south. The borough's abundant Metro-land semis often retain fuller permitted development rights than inner-London terraces.
Typical Hillingdon housing stock
Metro-land interwar semi-detached and detached houses across Ruislip, Eastcote and Ickenham, the historic timber-framed core of Ruislip Village, and green-belt and edge-of-London properties toward Harefield and the Colne Valley.
Areas we regularly draw for in Hillingdon
Uxbridge · Ruislip · Hayes · Hillingdon · Northwood · Ickenham · Eastcote · West Drayton
Wraparound Extension Drawings for Hillingdon homes: the package and the process
Every wraparound extension drawings we prepare for a Hillingdon property is drawn to London Borough of Hillingdon’s validation standards and tuned to the local constraints above. Here is what the drawing package covers and how the process runs from first survey to approval.
A wraparound extension is what happens when a rear extension and a side return are designed together rather than as two separate projects: the new build wraps around the back corner of the house, turning a galley kitchen and a small rear room into one continuous kitchen, dining and living space running the full width of the plot. It is the most ambitious single-storey option most London terraces and semi-detached houses have, and because it reshapes almost the entire ground floor, it needs careful structural and drainage planning as well as a confident planning application.
DrawingsDirect draws wraparound extensions for full planning and building regulations, with structural calculations for the L-shaped frame and any drainage diversion produced in-house by our MCIAT-chartered team, on a fixed fee. If your project is a single-storey rear addition or a side infill on its own, see our Rear Extension and Side Return Extension pages; if you also want a second storey, see Double Storey Extension Drawings.
What makes a wraparound extension different from a rear or side return alone?
A rear extension adds depth at the back of the house; a side return adds width down the alley; a wraparound does both at once, so the new floor area turns the corner of the original building rather than sitting against just one wall. The result is typically the largest open-plan space a single-storey extension can deliver, but it also means more of the original external wall is removed and more of the roof is new, which raises the structural and drainage stakes compared with either extension on its own. Homeowners who start out planning a rear extension or a side return alone often move to a wraparound once they see how little extra it costs to combine the two, since much of the groundwork, roof structure and glazing is shared between them rather than duplicated.
Do wraparound extensions need full planning permission in London?
Almost always, yes. Permitted development allowances are calculated on combined additions to the original house, and a wraparound's depth plus width together generally exceed the volume and footprint limits that apply to a rear extension or side extension considered separately. A Lawful Development Certificate route is rarely viable for a genuine wraparound.
Conservation area status and Article 4 directions, common across the terraced streets where wraparound extensions are most popular, remove permitted development rights further still, so we design every wraparound on the assumption it will go through full householder planning.
| Route | What it covers | Typical fee |
|---|---|---|
| Full planning permission | Required for almost all wraparound extensions given the combined footprint | Full Planning pack ~£1,600–£2,400 |
| Planning + Building Regulations (structural) | Combined pack including structural calculations for the L-shaped frame and drainage diversion | Planning + Building Regs pack ~£2,200–£3,850 |
| Rear extension alone (comparison) | Smaller single-storey addition, may qualify for permitted development | see Rear Extension Drawings, from £1,100 |
| Side return alone (comparison) | Widens the kitchen only, keeps garden depth unchanged | see Side Return Extension Drawings, from £1,400 |
Wraparound Extension Drawings across Hillingdon
Wraparound Extension Drawings in Hillingdon — FAQs
How much does a wraparound extension cost to design in London?+
Does a wraparound extension always need planning permission?+
Do I need an architect for a wraparound extension?+
Will I need a Party Wall Agreement for a wraparound extension?+
How long does it take to get wraparound extension drawings?+
Do I need planning permission for a loft conversion in Hillingdon?+
How does the Colne Valley green belt affect my Hillingdon project?+
Does proximity to Heathrow affect my plans?+
How long does Hillingdon Council take to decide?+
How much do planning drawings cost in Hillingdon?+
Get your free Hillingdon planning assessment
Tell us your Hillingdon address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.