White stucco Belgravia SW1X terrace and mansion flats within Westminster City Council's Belgravia conservation area

Belgravia · SW1X · Westminster

House Extension Drawings in Belgravia SW1X

Fixed-fee, MCIAT-chartered house extension drawings for Belgravia (SW1X) homeowners — Westminster City Council validation and local constraints handled from the start.

Belgravia (SW1X) is the Grosvenor estate at its grandest — stucco-fronted terraces and garden squares where the dominant work is careful internal reconfiguration of large townhouses and mansion flats, basement formation, and servicing upgrades rather than the rear extensions typical of outer London. The planning context is among the most demanding in the country, and the drawings have to reflect that from the first line.

Because so much of the stock is listed and every street sits within the Belgravia conservation area, most projects turn on listed-building consent as much as planning, and any lower-ground or basement scheme runs straight into Westminster's strict subterranean policy. We establish the listing grade, the conservation boundary and the Grosvenor estate's separate freeholder requirements before drawing, and prepare the application to Westminster City Council's validation standard.

Proposed floor plan

Belgravia SW1X

Belgravia (SW1X) — planning at a glance

Council: Westminster City Council
Postcode district: SW1X
Planning portal: View the Westminster planning portal
Housing stock: Grand white-stucco terraces and set-piece garden squares laid out for the Grosvenor estate from the 1820s — Eaton Square, Belgrave Square and their tributary streets — behind them cobbled mews and a layer of later mansion flats, much of it statutorily listed and held on long leases.
Article 4: Westminster City Council does not publish its Article 4 directions to the national planning register, so permitted development rights in Belgravia (SW1X) can’t be confirmed from open data alone — we check the direction schedule with the council before recommending a route, as part of the fixed fee. Belgravia conservation-area control, extensive statutory listing and Grosvenor estate freeholder consent together define almost every project here.
Conservation: BelgraviaGrosvenor GardensAlbert Gate
Sample streets: Eccleston Square · Hugh Street · Warwick Way · St George's Drive
Local constraints: Belgravia conservation area governing rooflines, stucco detailing, railings and the uniformity of the terraced elevationsWidespread statutory listing, so much internal reconfiguration needs listed-building consent alongside planningGrosvenor estate freeholder consent required on top of council permission for most leasehold worksWestminster's restrictive basement and subterranean development policy governing depth, structure and construction impact

Planning in Belgravia (SW1X): what to know before you apply

There is no published householder Article 4 direction that changes the picture in SW1X because the real controls are stronger still: pervasive statutory listing, blanket Belgravia conservation-area status and Westminster's restrictive basement policy. Grosvenor estate leaseholders also need freeholder licence for alterations, which we account for alongside the council submission.

Typical Belgravia housing stock

Grand white-stucco terraces and set-piece garden squares laid out for the Grosvenor estate from the 1820s — Eaton Square, Belgrave Square and their tributary streets — behind them cobbled mews and a layer of later mansion flats, much of it statutorily listed and held on long leases.

Streets we regularly draw for in Belgravia

Eccleston Square · Hugh Street · Warwick Way · St George's Drive

House Extension Drawings for Belgravia (SW1X) homes: the package and the process

Every house extension drawings we prepare for an Belgravia property is drawn to Westminster City Council’s validation standards and tuned to the SW1X constraints above. Here is what the drawing package covers and how the process runs from first survey to approval.

A well-drawn extension adds space and value while sailing through the council; a poorly-drawn one triggers objections and refusals. DrawingsDirect draws rear, side-return, wraparound, double-storey and basement extensions for London homes — sized to your borough's tolerances, with daylight and neighbour impact considered before the planners raise them.

Which extension types do you draw?

Every London extension is shaped by the plot, the neighbours and the borough's design guidance. We draw them all.

Rear extension

A single-storey rear extension is often permitted development within depth limits — ideal for an open-plan kitchen-diner.

Side-return

Fills the alley beside a Victorian terrace, widening the ground floor without losing garden.

Wraparound

Combines a rear and side-return extension for a transformative ground floor, usually needing planning permission.

Double-storey

Adds space above and below, subject to tighter scale and neighbour-impact scrutiny.

Basement

Creates space downward where footprint is limited, with structural and party-wall care.

Do I need planning permission for a house extension in London?

Single-storey rear extensions within permitted development limits (up to 6m for terraced/semi-detached homes under the larger-home scheme, subject to neighbour consultation) may not need a full application. Wraparounds, double-storeys and anything in a conservation area usually do. We assess your plot and recommend the right route before drawing.

Typical London extension drawing packages
Extension	Typical route	Package	Fee from
Single-storey rear	Permitted development / householder	Planning + building regs	£1,100
Side-return	Householder planning	Planning + building regs + structural	£1,600
Wraparound	Householder planning	Full package + structural	£2,200
Double-storey	Householder planning	Full package + structural	£2,400

Also in Belgravia SW1X

Planning Permission Planning Drawings Architectural Drawings Building Regulations Drawings Loft Conversion Drawings House Extension Drawings across Westminster House Extension Drawings across London

FAQ

House Extension Drawings in Belgravia SW1X — FAQs

How far can I extend without planning permission in London?+

Under permitted development, single-storey rear extensions can reach 3m (terraced/semi) or 4m (detached), or up to 6–8m under the prior-approval larger-home scheme — but conservation areas and Article 4 directions can remove these rights. We check your property first.

Do extension drawings include structural calculations?+

Our full package includes structural drawings and calculations coordinated in-house, so your builder can price and build without waiting on an engineer.

How long do extension drawings take?+

Typically about 7 days from survey to a full drawing set delivered to your online portal.

Will my rear extension need a party wall agreement?+

If you build up to or on a shared boundary, excavate near a neighbour's foundations, or cut into a party wall for a steel, the Party Wall etc. Act 1996 usually applies. Our drawings show the works clearly so a party wall surveyor — or your neighbour — can see exactly what is proposed, which keeps that process quick.

Can I extend a house in a conservation area?+

Yes, but conservation areas and Article 4 directions commonly remove permitted development for rear and side extensions, so the work needs a full householder application designed to the council's heritage guidance. We confirm your property's designation before recommending a route.

Do I need planning permission for works in Westminster?+

Almost always. The great majority of Westminster falls within a conservation area and a high proportion of buildings are listed, so a full planning application — and often listed-building consent — is usually required even for modest works. Permitted development rarely applies. We screen conservation, listing and lease constraints for your address before recommending a route.

I live in a mansion block — what extra consent might I need?+

Much of Westminster's stock is mansion-block or garden-square terrace, and the lease frequently requires the freeholder's consent alongside planning for external alterations. We confirm the lease position early and design a scheme that satisfies both the freeholder and the council, since either can block an otherwise sound proposal.

Will I need a Basement Impact Assessment in Westminster?+

Usually, for below-ground works. The City Plan basement policy requires a basement impact assessment and limits scale. If you are considering a basement or lower-ground extension we flag the requirement early and coordinate the structural and drainage input so the application is complete when submitted.

How long does Westminster City Council take to decide?+

Westminster determines most householder applications within the statutory eight-week period once validated, though listed-building, basement and conservation cases frequently attract additional consultation. We prepare submissions to the council's exacting validation and design standards to avoid the drawing queries that cause most delays.

How much do planning drawings cost in Westminster?+

We agree a fixed fee before we start, typically around 30% below an architect's fee for the same council-accepted drawings, with free redraws until the council approves. Heritage-led, listed-building and basement schemes require more evidence than a standard extension, so we quote once we understand your address and scheme rather than by the hour.

Free Fixed Quote

Get your free Belgravia planning assessment

Tell us your Belgravia (SW1X) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.