MCIAT chartered drawings · Fixed fees across all 33 London boroughs

Free 2026 London Planning ReportHMO Conversion Drawings in Richmond

Elegant London period townhouses of the kind found in Richmond upon Thames conservation areas
Richmond · London

HMO Conversion Drawings in Richmond

Fixed-fee, MCIAT-chartered hmo conversion drawings for Richmond homeowners — London Borough of Richmond upon Thames validation and local constraints handled from the start.

Free Richmond planning assessment

Tell us your Richmond address and project. A fixed quote and free planning appraisal land within one working day.

No obligation · No spam · Reply within 1 working day

Richmond upon Thames is one of London's most design-sensitive boroughs. A high proportion of its housing — Georgian and Victorian townhouses, Edwardian villas and riverside cottages — sits within conservation areas such as Richmond Green, Twickenham Riverside, Teddington, Kew Green and Barnes Green, and much of it lies within the Thames flood zone. Applications here succeed on the strength of careful, context-led drawings rather than standard templates, and permitted development cannot be assumed even for modest works.

The London Borough of Richmond upon Thames has some of the most extensive Article 4 coverage in London, with widespread directions removing permitted development rights across its conservation areas, plus basement and front-garden controls in parts of the borough. In practice that means alterations which would be automatic elsewhere — dormers, cladding, some rear works — need a full householder application here. Near the river in Twickenham, Richmond and Hampton, Thames flood-zone requirements apply, and protected views and river-frontage design control shape what is achievable, so we confirm the constraints for your exact address before drawing.

We prepare Richmond planning applications that respond to the borough's conservation and riverside setting, designing context-led drawings that reflect the period townscape and evidencing flood-risk and finished-floor-level considerations within the submission so the council can validate and approve without repeated revisions. The fee is fixed and agreed up front, typically around 30% below an architect's fee for the same council-accepted drawings, with free redraws until Richmond approves. Because so much turns on design detail, we prepare submissions to the validation checklist with the elevations and materials the council expects; conservation and riverside cases can attract additional consultation, but most householder applications are still determined within the statutory eight-week period, and our roughly seven-day drawing turnaround gets schemes moving quickly.

Elegant London period townhouses of the kind found in Richmond upon Thames conservation areas
Isometric illustration of a Richmond home extension design
Proposed floor plan
Richmond

Planning in Richmond: what to know before you apply

Richmond has some of the most extensive Article 4 coverage in London, so permitted development cannot be assumed even for modest works — many conservation areas require a full application. Thames flood-zone considerations also apply near the river. We confirm the constraints for your exact address before drawing.

Typical Richmond housing stock

Georgian and Victorian townhouses, Edwardian villas and riverside cottages, many within conservation areas and close to the Thames.

Areas we regularly draw for in Richmond

Richmond · Twickenham · Teddington · Kew · Barnes · East Sheen · Hampton

HMO Conversion Drawings for Richmond homes: the package and the process

Every hmo conversion drawings we prepare for a Richmond property is drawn to London Borough of Richmond upon Thames’s validation standards and tuned to the local constraints above. Here is what the drawing package covers and how the process runs from first survey to approval.

A House in Multiple Occupation (HMO) is a property let to three or more unrelated occupants sharing kitchen, bathroom or living facilities. A small HMO — three to six sharers — normally falls into Use Class C4, while a large HMO of seven or more occupants is sui generis, sitting entirely outside the Use Classes Order. Both routes trigger licensing requirements, and in many London boroughs an Article 4 direction removes the usual permitted development right to convert a family home (C3) into a small HMO (C4), meaning full planning permission is needed even for a straightforward conversion.

DrawingsDirect draws HMO conversions to the standard your borough's planning and licensing teams both expect — minimum room sizes, amenity provision, fire safety and means of escape — so one set of drawings supports both the planning application, where needed, and the licensing submission. We check whether an Article 4 direction applies to your property before you commit to a route, and coordinate fire safety and structural detail in-house.

C4 small HMO or sui generis large HMO — which applies to your property?

The distinction matters because it decides which rules apply. A small HMO housing three to six unrelated sharers who share amenities is Class C4. A large HMO of seven or more occupants is sui generis and always needs planning permission, since sui generis uses sit outside the permitted development system entirely. The line also shifts with occupancy — a property let to six sharers today can tip into sui generis territory the moment a seventh tenancy is signed, which changes the planning position even though nothing about the building itself has changed. We assess your proposed occupancy and layout against both definitions before drawing, so the application matches how the property will actually be let.

Do I need planning permission for an HMO conversion in London?

Converting a family home (C3) into a small HMO (C4) is technically permitted development under national rules, but a large number of London boroughs have made an Article 4 direction that removes this right across all or part of the borough — meaning a full planning application is required even for a small, compliant HMO. Article 4 directions vary street by street in some boroughs, so two similar houses a few doors apart can sit on opposite sides of the line. Any large HMO (sui generis) needs planning permission everywhere, regardless of Article 4. We check your specific address against the relevant borough's Article 4 direction before recommending a route, since guessing wrong wastes both time and application fees.

HMO routes and standards in London
FactorC4 small HMO (3–6 sharers)Sui generis large HMO (7+)
Use classC4Sui generis
Planning permissionOften needed due to Article 4 directions in most boroughsAlways needed
LicensingMandatory if 5+ occupants; additional licensing in many boroughsMandatory
Typical drawing packageFrom £1,400Full planning + building regs, from £2,200
FAQ

HMO Conversion Drawings in Richmond — FAQs

How much do HMO conversion drawings cost in London?+
HMO conversion packages typically start from £1,400, rising where full planning permission, structural work or a larger occupancy is involved. We agree a fixed fee upfront, before drawing begins.
Is HMO conversion permitted development in London?+
Only sometimes. Converting a home into a small HMO (C4) can be permitted development nationally, but many London boroughs have removed that right with an Article 4 direction, and any large HMO (seven or more occupants) always needs planning permission. We check your address before recommending a route.
Do I need a licence as well as planning permission?+
Usually yes. Licensing and planning permission are separate processes assessed by different council teams — most HMOs need a mandatory or additional licence regardless of whether planning permission was also required for the conversion.
Do I need an architect for an HMO conversion?+
No. As an MCIAT-chartered architectural technologist practice, we prepare the same council-accepted drawings an architect would, coordinated with structural and fire safety detail, typically at a lower fee.
How long do HMO conversion drawings take?+
Drawings are typically ready around 7 days from survey. Where full planning permission is needed, the council then has a statutory eight-week period to determine the application.
Do I need planning permission for an extension in Richmond?+
More often than in most boroughs, yes. Richmond has some of the most extensive Article 4 coverage in London, so permitted development cannot be assumed even for modest works — many conservation areas such as Richmond Green, Teddington and Kew Green require a full application. We confirm the exact designation for your address first and design accordingly rather than relying on permitted development.
My Richmond home is near the river — does flood risk affect my application?+
It can. Much of the borough lies within the Thames flood zone, and the council expects flood-risk considerations to be addressed for works near the river in Twickenham, Richmond and Hampton. We evidence flood-risk and finished-floor-level considerations within the application so the council can validate and approve without repeated revisions.
What does Richmond's Article 4 coverage mean in practice?+
Article 4 directions remove permitted development rights across many of Richmond's conservation areas, so alterations that would be automatic elsewhere — dormers, cladding, some rear works — need a full householder application here. We design context-led drawings that respond to the borough's period townscape and river frontage, which is what carries an application to consent in Richmond.
How long does Richmond Council take to decide?+
Richmond determines most householder applications within the statutory eight-week period once validated, though conservation and riverside cases can attract additional consultation. Because so much turns on design detail here, we prepare submissions to the validation checklist with the elevations and materials the council expects, to avoid drawing queries.
How much do planning drawings cost in Richmond?+
We agree a fixed fee before starting, typically around 30% below an architect's fee for the same council-accepted drawings, with free redraws until Richmond approves. Conservation and flood-zone cases require more evidence than a standard extension, so we quote once we understand your address and scheme rather than by the hour.
Free Fixed Quote

Get your free Richmond planning assessment

Tell us your Richmond address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.