Floor Plans in Thames View IG11
Fixed-fee, MCIAT-chartered floor plans for Thames View (IG11) homeowners — London Borough of Barking and Dagenham validation and local constraints handled from the start.
Thames View (IG11) is a cohesive 1950s London County Council overspill estate, built on former marshland south of Barking town centre as a planned postwar community of low-rise council-built houses and blocks. That open, uniform estate layout — quite distinct from the borough's older terraced streets — is what shapes nearly every householder project here, so an extension has to sit comfortably within a very consistent, planned streetscape.
There is no conservation area covering Thames View — that is a genuine, verified fact, not an omission. Its planning character is shaped instead by the sheer uniformity of the estate layout and by Barking and Dagenham's householder design expectations, which lean on keeping the original postwar rhythm, materials and building lines intact. We treat that estate cohesion, rather than a conservation designation, as the reference point when we design an extension.
Because so many Thames View houses passed into private ownership after Right to Buy, demand for rear extensions, side infills and loft conversions is steady across streets like Bastable Avenue, Maplestead Road and Moore Crescent. We check each property's permitted-development position against Barking and Dagenham's borough-wide controls first, then prepare drawings that either stay within permitted development or are ready to validate as a full householder application.
Planning in Thames View (IG11): what to know before you apply
Because the estate is so uniform, Barking and Dagenham assess extensions on Thames View houses against the consistent postwar street pattern, so matching brick, render and roof form matters more than on a mixed-typology road. There is no conservation area and no estate-specific Article 4 direction, so many houses retain permitted development rights for rear and loft work — but the open estate layout, shared building lines and low-lying former-marshland ground mean spacing, neighbour impact and drainage are the points an application turns on.
Typical Thames View housing stock
Cohesive 1950s council-built houses and low-rise blocks arranged on a planned, open postwar layout, many now privately owned following Right to Buy — which is what drives the steady flow of rear-extension and loft-conversion work across the estate.
Streets we regularly draw for in Thames View
Bastable Avenue · River Road · Renwick Road · Choats Road · Upney Lane · Stamford Road · Aconbury Road · Pinley Gardens · Burnham Road · Maplestead Road · Castle Road · Moore Crescent
Floor Plans for Thames View (IG11) homes: the package and the process
Every floor plans we prepare for an Thames View property is drawn to London Borough of Barking and Dagenham’s validation standards and tuned to the IG11 constraints above. Here is what the drawing package covers and how the process runs from first survey to approval.
Not every project needs a full planning drawing set. If you are selling or letting a property, drawing up a lease, recording a layout before a refurbishment, or simply want an accurate plan of your home, what you need is a floor plan — a scaled, dimensioned drawing of each level, measured directly from the property rather than estimated from an old plan or an estate agent's rough sketch. DrawingsDirect produces floor plans from a laser-measured site visit, so room sizes, wall thicknesses and door and window positions are accurate, not approximate.
Floor plans are commonly used for estate agency marketing and Rightmove or Zoopla listings, for lease plans required by a mortgage lender or solicitor, for landlords documenting a rental property's layout, or as a straightforward existing-layout record before any building work is decided. They are lighter than a full architectural or planning drawing set — there is no design work, no application, and no borough-specific requirements to satisfy — so turnaround is fast and the fee is correspondingly lower. If you later decide to extend, convert a loft or apply for planning permission, the same laser survey can usually be reused as the base for those drawings rather than re-measuring the property from scratch.
What are floor plans used for?
Floor plans serve several distinct purposes in London property: estate agents use them to market a sale or letting alongside photographs, giving buyers and tenants an accurate sense of layout and scale that a floor plan on its own can convey better than photos; solicitors and lenders often require a lease plan showing the demise of a flat within a building, particularly for leasehold sales or re-mortgages; landlords use them to document a property's layout for reference, insurance or portfolio management; and homeowners use them simply to have an accurate record of their existing layout, whether for their own reference or as the first step before considering any building work.
How accurate are laser-measured floor plans?
We measure every floor plan on site using a laser distance meter rather than a tape measure or estimation from photographs, which keeps room dimensions, wall thicknesses and door and window positions accurate to within a few millimetres. This matters more than it might seem: an estate agent's marketing plan that overstates a room's size can mislead a buyer and cause problems at survey stage, while a lease plan used for legal purposes needs to accurately reflect what a leaseholder actually owns. A laser-measured plan also means that if you later want to use it as the existing-layout drawing for a planning application, it is already accurate enough to build proposed drawings on top of, rather than needing to be re-measured.
| Floor plans | Full planning drawing set | |
|---|---|---|
| Purpose | Record of existing layout | Existing layout plus a designed proposal |
| Includes a proposed design | No | Yes |
| Submitted to the council | No | Yes, via the Planning Portal |
| Typical turnaround | A few days | Around 7 days from survey |
| Fee guide | From £450 | From £1,600 |
Floor Plans in Thames View IG11 — FAQs
How much do floor plans cost in London?+
How long does it take to get floor plans?+
Can floor plans be used for a lease or mortgage application?+
Can I reuse my floor plans if I later want to extend or convert my loft?+
Do you provide floor plans for estate agents?+
Do I need planning permission to extend a house in Thames View?+
Is Thames View in a conservation area?+
How much do planning and building-regulation drawings cost for a Thames View extension?+
Get your free Thames View planning assessment
Tell us your Thames View (IG11) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.