Rear extension on a 1950s council-built house on the Thames View estate, IG11, in Barking and Dagenham

Thames View · IG11 · Barking & Dagenham

Architectural Drawings in Thames View IG11

Fixed-fee, MCIAT-chartered architectural drawings for Thames View (IG11) homeowners — London Borough of Barking and Dagenham validation and local constraints handled from the start.

Thames View (IG11) is a cohesive 1950s London County Council overspill estate, built on former marshland south of Barking town centre as a planned postwar community of low-rise council-built houses and blocks. That open, uniform estate layout — quite distinct from the borough's older terraced streets — is what shapes nearly every householder project here, so an extension has to sit comfortably within a very consistent, planned streetscape.

There is no conservation area covering Thames View — that is a genuine, verified fact, not an omission. Its planning character is shaped instead by the sheer uniformity of the estate layout and by Barking and Dagenham's householder design expectations, which lean on keeping the original postwar rhythm, materials and building lines intact. We treat that estate cohesion, rather than a conservation designation, as the reference point when we design an extension.

Because so many Thames View houses passed into private ownership after Right to Buy, demand for rear extensions, side infills and loft conversions is steady across streets like Bastable Avenue, Maplestead Road and Moore Crescent. We check each property's permitted-development position against Barking and Dagenham's borough-wide controls first, then prepare drawings that either stay within permitted development or are ready to validate as a full householder application.

Proposed floor plan

Thames View IG11

Thames View (IG11) — planning at a glance

Council: London Borough of Barking and Dagenham
Postcode district: IG11
Planning portal: View the Barking & Dagenham planning portal
Housing stock: Cohesive 1950s council-built houses and low-rise blocks arranged on a planned, open postwar layout, many now privately owned following Right to Buy — which is what drives the steady flow of rear-extension and loft-conversion work across the estate.
Article 4: No area-specific Article 4 direction is published for the Thames View Estate; the London Borough of Barking and Dagenham's borough-wide permitted-development controls and householder design guidance still apply.
Sample streets: Bastable Avenue · River Road · Renwick Road · Choats Road · Upney Lane · Stamford Road · Aconbury Road · Pinley Gardens · Burnham Road · Maplestead Road · Castle Road · Moore Crescent
Local constraints: Strong estate-wide visual cohesion: the uniform 1950s layout of low-rise council-built houses on an open plan means front-elevation changes, roof forms and materials are read against a consistent street rhythm rather than a one-off houseBarking and Dagenham's borough-wide permitted-development limits and householder design guidance govern extension depth, height and coverage; no local Article 4 direction narrows those rights further on the estateMatching original facing brick, render finishes and roof tiles so a rear or side addition reads as part of the original postwar house rather than an obvious bolt-onOpen estate layouts and shared or generous frontages, where a front or side addition can affect the planned spacing and the wider street scenePostwar houses with shared and adjoining building lines, making party-wall relationships and overshadowing relevant to what gets approvedLow-lying former-marshland ground south of Barking near the river, so ground conditions and any Environment Agency flood-zone position are worth checking early as they affect foundation and drainage design at building-regulations stage

Planning in Thames View (IG11): what to know before you apply

Because the estate is so uniform, Barking and Dagenham assess extensions on Thames View houses against the consistent postwar street pattern, so matching brick, render and roof form matters more than on a mixed-typology road. There is no conservation area and no estate-specific Article 4 direction, so many houses retain permitted development rights for rear and loft work — but the open estate layout, shared building lines and low-lying former-marshland ground mean spacing, neighbour impact and drainage are the points an application turns on.

Typical Thames View housing stock

Cohesive 1950s council-built houses and low-rise blocks arranged on a planned, open postwar layout, many now privately owned following Right to Buy — which is what drives the steady flow of rear-extension and loft-conversion work across the estate.

Streets we regularly draw for in Thames View

Bastable Avenue · River Road · Renwick Road · Choats Road · Upney Lane · Stamford Road · Aconbury Road · Pinley Gardens · Burnham Road · Maplestead Road · Castle Road · Moore Crescent

Architectural Drawings for Thames View (IG11) homes: the package and the process

Every architectural drawings we prepare for an Thames View property is drawn to London Borough of Barking and Dagenham’s validation standards and tuned to the IG11 constraints above. Here is what the drawing package covers and how the process runs from first survey to approval.

Architectural drawings are the overarching technical design for a building project — the master set from which planning drawings, building regulations drawings and construction details all flow. Where a planning application is one regulatory hurdle, the architectural drawing package is the complete design record of your home improvement.

DrawingsDirect provides that full service through MCIAT-chartered architectural technologists: the same professional, council-accepted output as an architecture practice, coordinated with structural engineering in-house, at a fixed fee.

What do architectural drawings include?

A complete architectural package carries your project from idea to buildable detail, so builders quote accurately and councils and Building Control approve confidently.

Concept and feasibility sketches
Planning drawings for the local authority
Building regulations drawings with construction detail
Structural drawings and calculations
Schedules, specifications and material annotations

Architect or architectural technologist — which do I need in London?

For residential planning and building regulations work, an MCIAT-chartered technologist produces the same council-accepted drawings with the same professional accountability as an architect, typically at a lower fee. Councils do not score applications by the author's job title — they score the drawings. The table below compares the two on the factors homeowners actually care about.

Chartered architectural technologist vs traditional architect for a London home project
Factor	Architectural Technologist	Architect
Council-accepted drawings	Yes	Yes
Typical fee	~30% lower	Higher
Structural coordination	In-house	Often outsourced
Typical drawing turnaround	~7 days	Several weeks
Best for	Extensions, lofts, conversions	Bespoke new-build design

Also in Thames View IG11

Planning Permission Planning Drawings Building Regulations Drawings Loft Conversion Drawings House Extension Drawings Architectural Drawings across Barking & Dagenham Architectural Drawings across London

FAQ

Architectural Drawings in Thames View IG11 — FAQs

Are architectural drawings the same as planning drawings?+

Planning drawings are a subset of the architectural package — the drawings used specifically for a planning application. The architectural drawings also include building regulations and construction detail.

Will a technologist's drawings be accepted by my council?+

Yes. MCIAT-chartered technologists are a recognised professional body and their drawings are routinely accepted and approved by every London borough.

Can you take my project all the way to construction?+

Yes — from feasibility through planning, building regulations and structural detail, to a set your builder can price and build from.

Do I own the architectural drawings you produce?+

Yes. The drawings are yours to use, and any competent builder can price and build from them — you are never locked into a single contractor by the drawing package.

Can I commission just the planning stage for now?+

Yes. Many homeowners take a project to planning approval first and add the building regulations and construction package later. We stage the fee to match, so you only pay for the stage you need.

Do I need planning permission to extend a house in Thames View?+

Not always. Many Thames View houses retain permitted development rights, so a modest single-storey rear extension or a rear loft conversion can often proceed without a full planning application. Because the estate is uniform and the ground is low-lying former marshland, we check your property's size limits, building lines and drainage against Barking and Dagenham's controls first, and prepare a full householder application where the project goes beyond permitted development.

Is Thames View in a conservation area?+

No. There is no conservation area covering the Thames View Estate. Its planning character is shaped instead by the estate's uniform 1950s layout of low-rise council-built houses and Barking and Dagenham's householder design expectations, which favour keeping the original postwar street rhythm, materials and roof form intact when you extend.

How much do planning and building-regulation drawings cost for a Thames View extension?+

We work to fixed fees agreed before we start, with a typical turnaround of around seven days for a standard rear extension or loft on a Thames View house. As a chartered architectural technologist practice we produce the same council-accepted planning and building-regulation drawings as an architect, usually for a lower fee, and include free redraws until your application is approved.

Free Fixed Quote

Get your free Thames View planning assessment

Tell us your Thames View (IG11) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.