Rear extension on a 1950s council-built house on the Thames View estate, IG11, in Barking and Dagenham

Thames View · IG11 · Barking & Dagenham

Flat Conversion Drawings in Thames View IG11

Fixed-fee, MCIAT-chartered flat conversion drawings for Thames View (IG11) homeowners — London Borough of Barking and Dagenham validation and local constraints handled from the start.

Thames View (IG11) is a cohesive 1950s London County Council overspill estate, built on former marshland south of Barking town centre as a planned postwar community of low-rise council-built houses and blocks. That open, uniform estate layout — quite distinct from the borough's older terraced streets — is what shapes nearly every householder project here, so an extension has to sit comfortably within a very consistent, planned streetscape.

There is no conservation area covering Thames View — that is a genuine, verified fact, not an omission. Its planning character is shaped instead by the sheer uniformity of the estate layout and by Barking and Dagenham's householder design expectations, which lean on keeping the original postwar rhythm, materials and building lines intact. We treat that estate cohesion, rather than a conservation designation, as the reference point when we design an extension.

Because so many Thames View houses passed into private ownership after Right to Buy, demand for rear extensions, side infills and loft conversions is steady across streets like Bastable Avenue, Maplestead Road and Moore Crescent. We check each property's permitted-development position against Barking and Dagenham's borough-wide controls first, then prepare drawings that either stay within permitted development or are ready to validate as a full householder application.

Proposed floor plan

Thames View IG11

Thames View (IG11) — planning at a glance

Council: London Borough of Barking and Dagenham
Postcode district: IG11
Planning portal: View the Barking & Dagenham planning portal
Housing stock: Cohesive 1950s council-built houses and low-rise blocks arranged on a planned, open postwar layout, many now privately owned following Right to Buy — which is what drives the steady flow of rear-extension and loft-conversion work across the estate.
Article 4: No area-specific Article 4 direction is published for the Thames View Estate; the London Borough of Barking and Dagenham's borough-wide permitted-development controls and householder design guidance still apply.
Sample streets: Bastable Avenue · River Road · Renwick Road · Choats Road · Upney Lane · Stamford Road · Aconbury Road · Pinley Gardens · Burnham Road · Maplestead Road · Castle Road · Moore Crescent
Local constraints: Strong estate-wide visual cohesion: the uniform 1950s layout of low-rise council-built houses on an open plan means front-elevation changes, roof forms and materials are read against a consistent street rhythm rather than a one-off houseBarking and Dagenham's borough-wide permitted-development limits and householder design guidance govern extension depth, height and coverage; no local Article 4 direction narrows those rights further on the estateMatching original facing brick, render finishes and roof tiles so a rear or side addition reads as part of the original postwar house rather than an obvious bolt-onOpen estate layouts and shared or generous frontages, where a front or side addition can affect the planned spacing and the wider street scenePostwar houses with shared and adjoining building lines, making party-wall relationships and overshadowing relevant to what gets approvedLow-lying former-marshland ground south of Barking near the river, so ground conditions and any Environment Agency flood-zone position are worth checking early as they affect foundation and drainage design at building-regulations stage

Planning in Thames View (IG11): what to know before you apply

Because the estate is so uniform, Barking and Dagenham assess extensions on Thames View houses against the consistent postwar street pattern, so matching brick, render and roof form matters more than on a mixed-typology road. There is no conservation area and no estate-specific Article 4 direction, so many houses retain permitted development rights for rear and loft work — but the open estate layout, shared building lines and low-lying former-marshland ground mean spacing, neighbour impact and drainage are the points an application turns on.

Typical Thames View housing stock

Cohesive 1950s council-built houses and low-rise blocks arranged on a planned, open postwar layout, many now privately owned following Right to Buy — which is what drives the steady flow of rear-extension and loft-conversion work across the estate.

Streets we regularly draw for in Thames View

Bastable Avenue · River Road · Renwick Road · Choats Road · Upney Lane · Stamford Road · Aconbury Road · Pinley Gardens · Burnham Road · Maplestead Road · Castle Road · Moore Crescent

Flat Conversion Drawings for Thames View (IG11) homes: the package and the process

Every flat conversion drawings we prepare for an Thames View property is drawn to London Borough of Barking and Dagenham’s validation standards and tuned to the IG11 constraints above. Here is what the drawing package covers and how the process runs from first survey to approval.

Converting a house into flats is one of the few residential projects in London that always needs planning permission, whatever the size of the property or the number of units created. Splitting a single dwelling into two or more self-contained homes is treated as development regardless of whether any external work is proposed, because the change affects how the building is used and how many households occupy it.

DrawingsDirect draws house-to-flats conversions from the first survey through to a submission-ready planning and building-regulations package. Sound insulation between units, separate escape routes, individual services and London's minimum space standards are designed in from the layout stage, not retrofitted once the council asks for them — which is a large part of why our schemes are approved first time.

Do I need planning permission to convert a house into flats?

Yes, always. Converting a single dwelling into two or more self-contained flats is a change from one home to several, and that subdivision is treated as development requiring a full planning application — there is no permitted development route that allows it, regardless of the property's size or whether the exterior changes at all. The application has to demonstrate that each flat meets space, layout, amenity and parking standards in its own right, not just that the building as a whole is being used sensibly.

Boroughs also weigh the loss of a family-sized house against their local housing policy, since converting a larger house into several flats reduces the stock of homes suited to families even as it adds smaller units. We take that policy context into account when advising on layout and unit numbers, rather than simply maximising the number of flats the floor area could technically support.

What sound insulation is required between flats?

Part E of the building regulations sets minimum sound insulation standards for the walls and floors separating flats, covering both airborne and impact sound. Where an existing house is subdivided, the drawings specify how the party floors and walls between units will be upgraded — additional layers, resilient bars, or a floating floor — and pre-completion sound testing is normally required before the flats can be signed off. Getting this detail right on the drawings from the outset matters, because retrofitting sound insulation after a failed test usually means taking up a finished floor or ceiling that has already been decorated.

House-to-flats conversion drawing packages in London
Conversion	Typical scope	Route	Fee from
House to two self-contained flats	Vertical split, separate or shared entrance	Full planning plus building regulations	£1,600
House to three or more flats	Multiple units, fire strategy required	Full planning plus building regs plus structural	£2,400
Flat conversion with a side or rear extension	Additional floor area added to create compliant units	Full planning plus structural calculations	£2,800

Also in Thames View IG11

Planning Permission Planning Drawings Architectural Drawings Building Regulations Drawings Loft Conversion Drawings Flat Conversion Drawings across Barking & Dagenham Flat Conversion Drawings across London

FAQ

Flat Conversion Drawings in Thames View IG11 — FAQs

Do I need planning permission to convert a house into flats?+

Yes, always. Subdividing a single dwelling into two or more self-contained flats is treated as development in its own right, so a full planning application is required regardless of whether the exterior of the building changes.

How much do flat conversion drawings cost in London?+

Packages start from £1,600 for converting a house into two flats and rise to around £2,800 where three or more units, structural work or an extension are involved. We agree a fixed fee once we know the scope.

What sound insulation is required between flats?+

Part E of the building regulations sets minimum airborne and impact sound standards for the floors and walls separating flats, and pre-completion sound testing is normally required before the units can be signed off.

Does each flat need a separate fire escape?+

Each flat needs its own means of escape and the building needs to be fire-compartmented between units, using fire-rated floors, walls and doors and either a protected shared stairway or separate final exits.

What is the minimum size for a flat in London?+

London applies minimum internal floor areas based on bedroom and occupancy numbers, adopted from the national space standards through the London Plan. We check every proposed flat against the relevant threshold before drawing the layout.

Do I need planning permission to extend a house in Thames View?+

Not always. Many Thames View houses retain permitted development rights, so a modest single-storey rear extension or a rear loft conversion can often proceed without a full planning application. Because the estate is uniform and the ground is low-lying former marshland, we check your property's size limits, building lines and drainage against Barking and Dagenham's controls first, and prepare a full householder application where the project goes beyond permitted development.

Is Thames View in a conservation area?+

No. There is no conservation area covering the Thames View Estate. Its planning character is shaped instead by the estate's uniform 1950s layout of low-rise council-built houses and Barking and Dagenham's householder design expectations, which favour keeping the original postwar street rhythm, materials and roof form intact when you extend.

How much do planning and building-regulation drawings cost for a Thames View extension?+

We work to fixed fees agreed before we start, with a typical turnaround of around seven days for a standard rear extension or loft on a Thames View house. As a chartered architectural technologist practice we produce the same council-accepted planning and building-regulation drawings as an architect, usually for a lower fee, and include free redraws until your application is approved.

Free Fixed Quote

Get your free Thames View planning assessment

Tell us your Thames View (IG11) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.