Flat Conversion Drawings in Raynes Park SW20
Fixed-fee, MCIAT-chartered flat conversion drawings for Raynes Park (SW20) homeowners — London Borough of Merton validation and local constraints handled from the start.
Raynes Park (SW20) in Merton is a predominantly Edwardian and interwar suburb, running from the terraces around the station and Grand Drive to the semi-detached streets of West Wimbledon and Cottenham Park. The consistent interwar housing means side and rear additions and loft conversions follow a well-established pattern, and Merton's expectations for that house type are clearly documented.
The Wimbledon West conservation area toward Cottenham Park is the main designated control, governing frontages and roof changes for the houses inside its boundary. We confirm where a Raynes Park property sits relative to that boundary, and check for protected street trees, before recommending a permitted-development or full-application route and drawing to Merton's residential guidance.
Planning in Raynes Park (SW20): what to know before you apply
SW20 has no householder Article 4 direction, so many Raynes Park houses retain permitted development rights for side, rear and loft work — but the Wimbledon West conservation area toward Cottenham Park is the exception, and Tree Preservation Orders apply to street trees on several suburban roads.
Typical Raynes Park housing stock
Edwardian terraces around Raynes Park station and the Grand Drive streets, interwar semi-detached houses across West Wimbledon and Cottenham Park, and 1930s shopping parades along the main roads.
Streets we regularly draw for in Raynes Park
Coombe Lane · Grand Drive · Worple Road · Approach Road
Flat Conversion Drawings for Raynes Park (SW20) homes: the package and the process
Every flat conversion drawings we prepare for an Raynes Park property is drawn to London Borough of Merton’s validation standards and tuned to the SW20 constraints above. Here is what the drawing package covers and how the process runs from first survey to approval.
Converting a house into flats is one of the few residential projects in London that always needs planning permission, whatever the size of the property or the number of units created. Splitting a single dwelling into two or more self-contained homes is treated as development regardless of whether any external work is proposed, because the change affects how the building is used and how many households occupy it.
DrawingsDirect draws house-to-flats conversions from the first survey through to a submission-ready planning and building-regulations package. Sound insulation between units, separate escape routes, individual services and London's minimum space standards are designed in from the layout stage, not retrofitted once the council asks for them — which is a large part of why our schemes are approved first time.
Do I need planning permission to convert a house into flats?
Yes, always. Converting a single dwelling into two or more self-contained flats is a change from one home to several, and that subdivision is treated as development requiring a full planning application — there is no permitted development route that allows it, regardless of the property's size or whether the exterior changes at all. The application has to demonstrate that each flat meets space, layout, amenity and parking standards in its own right, not just that the building as a whole is being used sensibly.
Boroughs also weigh the loss of a family-sized house against their local housing policy, since converting a larger house into several flats reduces the stock of homes suited to families even as it adds smaller units. We take that policy context into account when advising on layout and unit numbers, rather than simply maximising the number of flats the floor area could technically support.
What sound insulation is required between flats?
Part E of the building regulations sets minimum sound insulation standards for the walls and floors separating flats, covering both airborne and impact sound. Where an existing house is subdivided, the drawings specify how the party floors and walls between units will be upgraded — additional layers, resilient bars, or a floating floor — and pre-completion sound testing is normally required before the flats can be signed off. Getting this detail right on the drawings from the outset matters, because retrofitting sound insulation after a failed test usually means taking up a finished floor or ceiling that has already been decorated.
| Conversion | Typical scope | Route | Fee from |
|---|---|---|---|
| House to two self-contained flats | Vertical split, separate or shared entrance | Full planning plus building regulations | £1,600 |
| House to three or more flats | Multiple units, fire strategy required | Full planning plus building regs plus structural | £2,400 |
| Flat conversion with a side or rear extension | Additional floor area added to create compliant units | Full planning plus structural calculations | £2,800 |
Flat Conversion Drawings in Raynes Park SW20 — FAQs
Do I need planning permission to convert a house into flats?+
How much do flat conversion drawings cost in London?+
What sound insulation is required between flats?+
Does each flat need a separate fire escape?+
What is the minimum size for a flat in London?+
Do I need planning permission for an extension in Merton?+
What is special about building at the John Innes estate in Merton Park?+
What do Merton's HMO Article 4 directions affect?+
How long does Merton Council take to decide?+
How much do planning drawings cost in Merton?+
Get your free Raynes Park planning assessment
Tell us your Raynes Park (SW20) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.