Kitchen extension inside a Victorian semi-detached house in New Malden KT3, Royal Borough of Kingston upon Thames

New Malden · KT3 · Kingston

Flat Conversion Drawings in New Malden KT3

Fixed-fee, MCIAT-chartered flat conversion drawings for New Malden (KT3) homeowners — Royal Borough of Kingston upon Thames validation and local constraints handled from the start.

New Malden (KT3) grew as a Victorian railway suburb after New Malden Station opened in 1846, and today the tree-named streets of The Groves conservation area preserve that late-Victorian semi-detached character.

KT3 also holds the Presburg Road conservation area, a compact estate of 'Queen Anne' and Renaissance-style houses laid out in the 1880s where alterations are judged against the original frontage detailing.

Proposed floor plan

New Malden KT3

New Malden (KT3) — planning at a glance

Council: Royal Borough of Kingston upon Thames
Postcode district: KT3
Planning portal: View the Kingston planning portal
Housing stock: Late-Victorian semi-detached and terraced houses built after New Malden Station opened in 1846, from the tree-named streets of The Groves to the 'Queen Anne' and Renaissance-style villas of the Presburg Road estate laid out by the London and Suburban Land Company in the 1880s.
Article 4: Royal Borough of Kingston upon Thames does not publish its Article 4 directions to the national planning register, so permitted development rights in New Malden (KT3) can’t be confirmed from open data alone — we check the direction schedule with the council before recommending a route, as part of the fixed fee. The Royal Borough of Kingston operates Article 4 directions elsewhere in the borough, but none are published to the national planning register and no householder Article 4 direction is confirmed within New Malden's KT3 conservation areas — so rely on the council's own Article 4 map rather than the national dataset when checking rights.
Conservation: The GrovesPresburg Road
Sample streets: Lime Grove · Chestnut Grove · Presburg Road · Westbury Road
Local constraints: The Groves conservation area — designated 1990, around 223 properties over 6.8 hectares — has tree-named streets whose Victorian semi-detached rhythm limits how far frontages and rooflines can change.The Presburg Road conservation area protects around 20 'Queen Anne' or Renaissance-style houses on Presburg, Westbury and Thetford Roads where original detailing is a designation reason.Kingston publishes no Article 4 rows to the national register, so KT3 permitted-development rights should be confirmed against the council's Article 4 map rather than assumed.

Planning in New Malden (KT3): what to know before you apply

Houses inside New Malden's The Groves and Presburg Road conservation areas are assessed against a consistent late-Victorian character, so extensions need to respect the semi-detached rhythm and original detailing. No householder Article 4 direction is confirmed for KT3 and Kingston publishes none to the national register, so verify rights on the council's Article 4 map.

Typical New Malden housing stock

Late-Victorian semi-detached and terraced houses built after New Malden Station opened in 1846, from the tree-named streets of The Groves to the 'Queen Anne' and Renaissance-style villas of the Presburg Road estate laid out by the London and Suburban Land Company in the 1880s.

Streets we regularly draw for in New Malden

Lime Grove · Chestnut Grove · Presburg Road · Westbury Road

Flat Conversion Drawings for New Malden (KT3) homes: the package and the process

Every flat conversion drawings we prepare for an New Malden property is drawn to Royal Borough of Kingston upon Thames’s validation standards and tuned to the KT3 constraints above. Here is what the drawing package covers and how the process runs from first survey to approval.

Converting a house into flats is one of the few residential projects in London that always needs planning permission, whatever the size of the property or the number of units created. Splitting a single dwelling into two or more self-contained homes is treated as development regardless of whether any external work is proposed, because the change affects how the building is used and how many households occupy it.

DrawingsDirect draws house-to-flats conversions from the first survey through to a submission-ready planning and building-regulations package. Sound insulation between units, separate escape routes, individual services and London's minimum space standards are designed in from the layout stage, not retrofitted once the council asks for them — which is a large part of why our schemes are approved first time.

Do I need planning permission to convert a house into flats?

Yes, always. Converting a single dwelling into two or more self-contained flats is a change from one home to several, and that subdivision is treated as development requiring a full planning application — there is no permitted development route that allows it, regardless of the property's size or whether the exterior changes at all. The application has to demonstrate that each flat meets space, layout, amenity and parking standards in its own right, not just that the building as a whole is being used sensibly.

Boroughs also weigh the loss of a family-sized house against their local housing policy, since converting a larger house into several flats reduces the stock of homes suited to families even as it adds smaller units. We take that policy context into account when advising on layout and unit numbers, rather than simply maximising the number of flats the floor area could technically support.

What sound insulation is required between flats?

Part E of the building regulations sets minimum sound insulation standards for the walls and floors separating flats, covering both airborne and impact sound. Where an existing house is subdivided, the drawings specify how the party floors and walls between units will be upgraded — additional layers, resilient bars, or a floating floor — and pre-completion sound testing is normally required before the flats can be signed off. Getting this detail right on the drawings from the outset matters, because retrofitting sound insulation after a failed test usually means taking up a finished floor or ceiling that has already been decorated.

House-to-flats conversion drawing packages in London
Conversion	Typical scope	Route	Fee from
House to two self-contained flats	Vertical split, separate or shared entrance	Full planning plus building regulations	£1,600
House to three or more flats	Multiple units, fire strategy required	Full planning plus building regs plus structural	£2,400
Flat conversion with a side or rear extension	Additional floor area added to create compliant units	Full planning plus structural calculations	£2,800

Also in New Malden KT3

Planning Permission Planning Drawings Architectural Drawings Building Regulations Drawings Loft Conversion Drawings Flat Conversion Drawings across Kingston Flat Conversion Drawings across London

FAQ

Flat Conversion Drawings in New Malden KT3 — FAQs

Do I need planning permission to convert a house into flats?+

Yes, always. Subdividing a single dwelling into two or more self-contained flats is treated as development in its own right, so a full planning application is required regardless of whether the exterior of the building changes.

How much do flat conversion drawings cost in London?+

Packages start from £1,600 for converting a house into two flats and rise to around £2,800 where three or more units, structural work or an extension are involved. We agree a fixed fee once we know the scope.

What sound insulation is required between flats?+

Part E of the building regulations sets minimum airborne and impact sound standards for the floors and walls separating flats, and pre-completion sound testing is normally required before the units can be signed off.

Does each flat need a separate fire escape?+

Each flat needs its own means of escape and the building needs to be fire-compartmented between units, using fire-rated floors, walls and doors and either a protected shared stairway or separate final exits.

What is the minimum size for a flat in London?+

London applies minimum internal floor areas based on bedroom and occupancy numbers, adopted from the national space standards through the London Plan. We check every proposed flat against the relevant threshold before drawing the layout.

Do I need planning permission for an extension in Kingston?+

The interwar semis of New Malden, Chessington and Tolworth often keep permitted development rights for rear extensions and lofts, so a full application isn't always needed. Conservation areas such as Surbiton, Coombe and the town centre, and riverside flood-zone constraints, can restrict this. We check your address first and can confirm permitted development with a Lawful Development Certificate.

My Kingston home is near the river — does flood risk affect my plans?+

It can. Riverside plots near Kingston lie within the Thames flood zone, and the council expects flood-risk and finished-floor-level considerations to be addressed for works there. We evidence these within the application so the council can validate and approve without repeated revisions.

Can I build a larger extension on a Coombe plot?+

Often, yes. The substantial detached houses on the Coombe hill sit on generous plots that make larger rear and double-storey extensions viable, subject to design and amenity policy. We design to use the plot fully within permitted-development allowances or a well-evidenced full application, checking the limits for detached homes first.

How long does the Royal Borough of Kingston take to decide?+

Kingston determines most householder applications within the statutory eight-week period once validated; conservation and riverside cases can involve additional consultation. We prepare submissions to the council's validation checklist to avoid the drawing queries that cause most delays.

How much do planning drawings cost in Kingston?+

We agree a fixed fee before starting, typically around 30% below an architect's fee for the same council-accepted drawings, with free redraws until Kingston approves. A suburban semi extension and a riverside or Coombe scheme differ in the evidence required, so we quote once we understand your address and project rather than by the hour.

Free Fixed Quote

Get your free New Malden planning assessment

Tell us your New Malden (KT3) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.