Flat Conversion Drawings in Earl's Court SW5
Fixed-fee, MCIAT-chartered flat conversion drawings for Earl's Court (SW5) homeowners — Royal Borough of Kensington and Chelsea validation and local constraints handled from the start.
Earl's Court (SW5) is a district of grand stucco garden-square terraces — Earl's Court Square, Nevern Square and Philbeach Gardens — most of them converted into mansion and conversion flats. Projects here are typically flat reconfigurations, rear-closet and lower-ground alterations, and lightwell or modest basement works rather than whole-house extensions.
As the terraces fall within RBKC conservation areas and are largely in multiple occupation, we prepare drawings that respect the uniform stucco frontages and coordinate the leasehold and party-wall realities of flats, meeting the Royal Borough of Kensington and Chelsea's standard on external detail and subterranean control.
Planning in Earl's Court (SW5): what to know before you apply
There is no published householder Article 4 direction, but conservation-area status across SW5 withdraws most permitted-development rights and shapes what flat and rear alterations are acceptable. RBKC's subterranean development policy applies to lightwells and lower-ground excavation.
Typical Earl's Court housing stock
SW5 is characterised by tall stucco-fronted Victorian terraces set around Earl's Court Square, Nevern Square and Philbeach Gardens, the majority long since divided into mansion and conversion flats. Because whole houses are rare, work here is dominated by flat reconfigurations, rear-closet and lower-ground alterations, and lightwell or modest basement schemes.
Streets we regularly draw for in Earl's Court
Philbeach Gardens · Eardley Crescent · Nevern Square · Bina Gardens
Flat Conversion Drawings for Earl's Court (SW5) homes: the package and the process
Every flat conversion drawings we prepare for an Earl's Court property is drawn to Royal Borough of Kensington and Chelsea’s validation standards and tuned to the SW5 constraints above. Here is what the drawing package covers and how the process runs from first survey to approval.
Converting a house into flats is one of the few residential projects in London that always needs planning permission, whatever the size of the property or the number of units created. Splitting a single dwelling into two or more self-contained homes is treated as development regardless of whether any external work is proposed, because the change affects how the building is used and how many households occupy it.
DrawingsDirect draws house-to-flats conversions from the first survey through to a submission-ready planning and building-regulations package. Sound insulation between units, separate escape routes, individual services and London's minimum space standards are designed in from the layout stage, not retrofitted once the council asks for them — which is a large part of why our schemes are approved first time.
Do I need planning permission to convert a house into flats?
Yes, always. Converting a single dwelling into two or more self-contained flats is a change from one home to several, and that subdivision is treated as development requiring a full planning application — there is no permitted development route that allows it, regardless of the property's size or whether the exterior changes at all. The application has to demonstrate that each flat meets space, layout, amenity and parking standards in its own right, not just that the building as a whole is being used sensibly.
Boroughs also weigh the loss of a family-sized house against their local housing policy, since converting a larger house into several flats reduces the stock of homes suited to families even as it adds smaller units. We take that policy context into account when advising on layout and unit numbers, rather than simply maximising the number of flats the floor area could technically support.
What sound insulation is required between flats?
Part E of the building regulations sets minimum sound insulation standards for the walls and floors separating flats, covering both airborne and impact sound. Where an existing house is subdivided, the drawings specify how the party floors and walls between units will be upgraded — additional layers, resilient bars, or a floating floor — and pre-completion sound testing is normally required before the flats can be signed off. Getting this detail right on the drawings from the outset matters, because retrofitting sound insulation after a failed test usually means taking up a finished floor or ceiling that has already been decorated.
| Conversion | Typical scope | Route | Fee from |
|---|---|---|---|
| House to two self-contained flats | Vertical split, separate or shared entrance | Full planning plus building regulations | £1,600 |
| House to three or more flats | Multiple units, fire strategy required | Full planning plus building regs plus structural | £2,400 |
| Flat conversion with a side or rear extension | Additional floor area added to create compliant units | Full planning plus structural calculations | £2,800 |
Flat Conversion Drawings in Earl's Court SW5 — FAQs
Do I need planning permission to convert a house into flats?+
How much do flat conversion drawings cost in London?+
What sound insulation is required between flats?+
Does each flat need a separate fire escape?+
What is the minimum size for a flat in London?+
Do I need planning permission for works in Kensington & Chelsea?+
Can I build a basement in Kensington & Chelsea?+
My home is listed — what consent do I need?+
How long does the Royal Borough take to decide?+
How much do planning drawings cost in Kensington & Chelsea?+
Get your free Earl's Court planning assessment
Tell us your Earl's Court (SW5) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.