Stucco Victorian garden-square terraces converted to flats in Earl's Court SW5, within Kensington and Chelsea Council conservation areas

Earl's Court · SW5 · Kensington & Chelsea

Planning Drawings in Earl's Court SW5

Fixed-fee, MCIAT-chartered planning drawings for Earl's Court (SW5) homeowners — Royal Borough of Kensington and Chelsea validation and local constraints handled from the start.

Earl's Court (SW5) is a district of grand stucco garden-square terraces — Earl's Court Square, Nevern Square and Philbeach Gardens — most of them converted into mansion and conversion flats. Projects here are typically flat reconfigurations, rear-closet and lower-ground alterations, and lightwell or modest basement works rather than whole-house extensions.

As the terraces fall within RBKC conservation areas and are largely in multiple occupation, we prepare drawings that respect the uniform stucco frontages and coordinate the leasehold and party-wall realities of flats, meeting the Royal Borough of Kensington and Chelsea's standard on external detail and subterranean control.

Proposed floor plan

Earl's Court SW5

Earl's Court (SW5) — planning at a glance

Council: Royal Borough of Kensington and Chelsea
Postcode district: SW5
Planning portal: View the Kensington & Chelsea planning portal
Housing stock: SW5 is characterised by tall stucco-fronted Victorian terraces set around Earl's Court Square, Nevern Square and Philbeach Gardens, the majority long since divided into mansion and conversion flats. Because whole houses are rare, work here is dominated by flat reconfigurations, rear-closet and lower-ground alterations, and lightwell or modest basement schemes.
Article 4: Royal Borough of Kensington and Chelsea does not publish its Article 4 directions to the national planning register, so permitted development rights in Earl's Court (SW5) can’t be confirmed from open data alone — we check the direction schedule with the council before recommending a route, as part of the fixed fee. Conservation-area control across the great garden-square terraces, most of them subdivided into flats, limits both external change and internal reconfiguration
Conservation: Earl's Court SquareNevern SquareEarl's Court VillagePhilbeach
Sample streets: Philbeach Gardens · Eardley Crescent · Nevern Square · Bina Gardens
Local constraints: The garden-square terraces sit within Earl's Court conservation areas, so external alterations lose most permitted-development rightsMost buildings are subdivided into flats, so leasehold structure and shared elements complicate rear and roof worksRBKC's strict basement (subterranean development) policy governs lightwell enlargement and any lower-ground excavationUniform stucco frontages mean windows, railings and cornices are closely protected against unsympathetic change

Planning in Earl's Court (SW5): what to know before you apply

There is no published householder Article 4 direction, but conservation-area status across SW5 withdraws most permitted-development rights and shapes what flat and rear alterations are acceptable. RBKC's subterranean development policy applies to lightwells and lower-ground excavation.

Typical Earl's Court housing stock

SW5 is characterised by tall stucco-fronted Victorian terraces set around Earl's Court Square, Nevern Square and Philbeach Gardens, the majority long since divided into mansion and conversion flats. Because whole houses are rare, work here is dominated by flat reconfigurations, rear-closet and lower-ground alterations, and lightwell or modest basement schemes.

Streets we regularly draw for in Earl's Court

Philbeach Gardens · Eardley Crescent · Nevern Square · Bina Gardens

Planning Drawings for Earl's Court (SW5) homes: the package and the process

Every planning drawings we prepare for an Earl's Court property is drawn to Royal Borough of Kensington and Chelsea’s validation standards and tuned to the SW5 constraints above. Here is what the drawing package covers and how the process runs from first survey to approval.

Planning drawings are the scale drawings a London council uses to judge your application: existing and proposed floor plans, elevations, sections and site plans that show the design, scale and neighbour impact of your project. DrawingsDirect produces complete, validation-ready planning drawing sets for extensions, lofts and conversions across London.

What is included in a planning drawing set?

A council will only validate an application that contains the right drawings at the right scale. Our standard planning set covers everything a London validation team expects.

Site location plan (1:1250) and block plan (1:500)
Existing floor plans, elevations and sections
Proposed floor plans, elevations and sections
Roof plans where relevant, with heights and materials annotated
A design and access or heritage statement where the borough requires one

How are planning drawings different from building regulations drawings?

Planning drawings show what the building will look like and how it sits in its context. Building regulations drawings show how it will be built safely — structure, insulation, fire escape and drainage. Most projects need both; our Complete package covers the two together with structural calculations coordinated in-house.

What a London planning drawing set contains
Drawing	Typical scale	What it shows
Site location plan	1:1250	The property in its street context, site edged red
Block plan	1:500	The building's footprint and position in the plot
Floor plans (existing & proposed)	1:100 / 1:50	Room layout, walls, openings and the proposed changes
Elevations (existing & proposed)	1:100 / 1:50	Each face of the building and how it changes
Sections	1:100 / 1:50	A cut through showing heights, levels and roof form

Also in Earl's Court SW5

Planning Permission Architectural Drawings Building Regulations Drawings Loft Conversion Drawings House Extension Drawings Planning Drawings across Kensington & Chelsea Planning Drawings across London

FAQ

Planning Drawings in Earl's Court SW5 — FAQs

What scale should London planning drawings be?+

Site location plans are 1:1250, block plans 1:500, and floor plans, elevations and sections are typically 1:100 or 1:50. We format every drawing to your specific borough's requirements.

Do I need an architect to produce planning drawings?+

No. MCIAT-chartered architectural technologists produce the same council-accepted planning drawings with the same professional accountability, and councils assess the drawings, not the author's job title.

How many revisions are included in the fee?+

All of them. The fee is fixed and we redraw free until your council approves — revisions requested by a planning officer never cost you extra.

Can you draw from my existing plans?+

We can work from existing measured drawings, but for accuracy we usually carry out a laser survey so the proposed set matches your property exactly.

Do planning drawings guarantee approval?+

No drawing can guarantee a decision, but drawing to the local plan and validation checklist maximises your odds — and we redraw free until approval.

Do I need planning permission for works in Kensington & Chelsea?+

Almost always. Near-comprehensive conservation-area coverage and a high density of listed buildings mean a full planning application — and often listed-building consent — is usually required even for modest works. Permitted development can rarely be assumed here. We confirm the exact designations and listing status for your address before any design begins.

Can I build a basement in Kensington & Chelsea?+

Within limits. The borough's basements policy is nationally known for restricting new basements — generally to a single storey — and controlling excavation extent, alongside a basement impact assessment. A basement can still be viable, but it must be designed to the policy from the outset. We confirm what your site allows and evidence the scheme accordingly.

My home is listed — what consent do I need?+

Listed-building consent is usually required alongside or instead of planning permission, and internal as well as external changes can be controlled. Given the borough's extensive listed-building coverage across Kensington, Chelsea and the mews, we screen listing status first and prepare the heritage-led drawings and justification the council expects.

How long does the Royal Borough take to decide?+

The council determines most householder applications within the statutory eight-week period once validated, though listed-building, basement and conservation cases frequently attract additional consultation. We prepare submissions to the borough's exacting validation and design standards to avoid the drawing queries that cause most delays.

How much do planning drawings cost in Kensington & Chelsea?+

We agree a fixed fee before starting, typically around 30% below an architect's fee for the same council-accepted drawings, with free redraws until the council approves. Heritage-led and listed-building schemes require more evidence than a standard extension, so we quote once we understand your address and scheme rather than by the hour.

Free Fixed Quote

Get your free Earl's Court planning assessment

Tell us your Earl's Court (SW5) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.