
Wraparound Extension Drawings in Southwark
Fixed-fee, MCIAT-chartered wraparound extension drawings for Southwark homeowners — London Borough of Southwark validation and local constraints handled from the start.
Southwark runs from the riverside warehouse and wharf conversions of Bankside and Bermondsey down through the Georgian and Victorian terraces of Camberwell, Peckham and Walworth to the leafy Georgian and Victorian streets of Dulwich, with post-war estate housing woven throughout. Terraced rear and side-return extensions and loft conversions are the borough's everyday projects, but each area behaves differently in planning terms, so the right route depends heavily on where your address sits.
Dulwich carries an extra layer that is distinctive to Southwark: the Dulwich Estate scheme of management, whose consent is often needed alongside the council's, similar in effect to a covenant and satisfied separately from planning permission. Elsewhere, conservation-area control shapes external design across a spread of designations — Dulwich Village, Bankside, Bermondsey Street, Camberwell Grove, Nunhead Cemetery and Peckham's Holly Grove among them — while the borough also operates Article 4 directions covering office-to-residential change of use in designated areas and HMO conversions in parts of the borough. Toward the Thames, riverside townscape and taller-building context add their own design scrutiny to conversions in Bankside and Bermondsey.
We prepare Southwark planning drawings tuned to the specific area — terraced extensions and lofts in Camberwell, Peckham and Nunhead, carefully evidenced applications within the conservation areas, and Dulwich schemes designed to the Estate's requirements as well as the council's — flagging whether the Estate scheme or an Article 4 direction applies before we draw. Southwark determines most householder applications within the statutory eight-week period once validated, so we work validation-first to head off drawing queries. The fee is fixed and agreed up front, drawings typically follow within about seven days, and we offer free redraws until the council approves — the same council-accepted drawings as an architect, usually at around 30% less.


Planning in Southwark: what to know before you apply
A distinctive Southwark quirk is the Dulwich Estate scheme of management: many properties on the Estate need Dulwich Estate consent in parallel with planning permission, similar in effect to a covenant. Elsewhere, conservation-area control across Camberwell, Bermondsey and Bankside shapes external design. We flag whether the Estate scheme applies before drawing.
Typical Southwark housing stock
Georgian and Victorian terraces across Camberwell, Peckham and Dulwich, warehouse and wharf conversions along the Bermondsey and Bankside riverside, and post-war estate housing.
Areas we regularly draw for in Southwark
Camberwell · Peckham · Dulwich · Bermondsey · Rotherhithe · Nunhead · Walworth · Bankside
Wraparound Extension Drawings for Southwark homes: the package and the process
Every wraparound extension drawings we prepare for a Southwark property is drawn to London Borough of Southwark’s validation standards and tuned to the local constraints above. Here is what the drawing package covers and how the process runs from first survey to approval.
A wraparound extension is what happens when a rear extension and a side return are designed together rather than as two separate projects: the new build wraps around the back corner of the house, turning a galley kitchen and a small rear room into one continuous kitchen, dining and living space running the full width of the plot. It is the most ambitious single-storey option most London terraces and semi-detached houses have, and because it reshapes almost the entire ground floor, it needs careful structural and drainage planning as well as a confident planning application.
DrawingsDirect draws wraparound extensions for full planning and building regulations, with structural calculations for the L-shaped frame and any drainage diversion produced in-house by our MCIAT-chartered team, on a fixed fee. If your project is a single-storey rear addition or a side infill on its own, see our Rear Extension and Side Return Extension pages; if you also want a second storey, see Double Storey Extension Drawings.
What makes a wraparound extension different from a rear or side return alone?
A rear extension adds depth at the back of the house; a side return adds width down the alley; a wraparound does both at once, so the new floor area turns the corner of the original building rather than sitting against just one wall. The result is typically the largest open-plan space a single-storey extension can deliver, but it also means more of the original external wall is removed and more of the roof is new, which raises the structural and drainage stakes compared with either extension on its own. Homeowners who start out planning a rear extension or a side return alone often move to a wraparound once they see how little extra it costs to combine the two, since much of the groundwork, roof structure and glazing is shared between them rather than duplicated.
Do wraparound extensions need full planning permission in London?
Almost always, yes. Permitted development allowances are calculated on combined additions to the original house, and a wraparound's depth plus width together generally exceed the volume and footprint limits that apply to a rear extension or side extension considered separately. A Lawful Development Certificate route is rarely viable for a genuine wraparound.
Conservation area status and Article 4 directions, common across the terraced streets where wraparound extensions are most popular, remove permitted development rights further still, so we design every wraparound on the assumption it will go through full householder planning.
| Route | What it covers | Typical fee |
|---|---|---|
| Full planning permission | Required for almost all wraparound extensions given the combined footprint | Full Planning pack ~£1,600–£2,400 |
| Planning + Building Regulations (structural) | Combined pack including structural calculations for the L-shaped frame and drainage diversion | Planning + Building Regs pack ~£2,200–£3,850 |
| Rear extension alone (comparison) | Smaller single-storey addition, may qualify for permitted development | see Rear Extension Drawings, from £1,100 |
| Side return alone (comparison) | Widens the kitchen only, keeps garden depth unchanged | see Side Return Extension Drawings, from £1,400 |
Wraparound Extension Drawings across Southwark
Wraparound Extension Drawings in Southwark — FAQs
How much does a wraparound extension cost to design in London?+
Does a wraparound extension always need planning permission?+
Do I need an architect for a wraparound extension?+
Will I need a Party Wall Agreement for a wraparound extension?+
How long does it take to get wraparound extension drawings?+
Do I need planning permission for an extension in Southwark?+
What is the Dulwich Estate scheme of management?+
Can you handle a warehouse or riverside conversion in Bermondsey or Bankside?+
How long does Southwark Council take to decide?+
How much do planning drawings cost in Southwark?+
Get your free Southwark planning assessment
Tell us your Southwark address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.