Wraparound Extension Drawings in Hampton TW12
Fixed-fee, MCIAT-chartered wraparound extension drawings for Hampton (TW12) homeowners — London Borough of Richmond upon Thames validation and local constraints handled from the start.
TW12 is Hampton, a Thames-side village whose historic core sits around the High Street, Church Street and Thames Street, and where owners typically plan a rear kitchen extension, a side return or a loft conversion suited to a period or inter-war home.
The Hampton Village conservation area protects the older streets near the river, so before assuming permitted development it is worth confirming with Richmond whether your property is inside the boundary and whether any Article 4 control applies, as that decides between PD and a full householder application.
Planning in Hampton (TW12): what to know before you apply
Outside the conservation area many rear and loft projects fall under permitted development within the usual size and eaves limits. Inside the Hampton Village conservation area, and near the Metropolitan Open Land frontages, a householder application is the safer route and the council should confirm current Article 4 status.
Typical Hampton housing stock
The Hampton Village core keeps its historic character around the High Street, Church Street and Thames Street near the river, while the wider TW12 is largely Victorian, Edwardian and inter-war terraces and semis on streets such as Station Road and Rose Hill.
Streets we regularly draw for in Hampton
High Street · Church Street · Thames Street · Station Road
Wraparound Extension Drawings for Hampton (TW12) homes: the package and the process
Every wraparound extension drawings we prepare for an Hampton property is drawn to London Borough of Richmond upon Thames’s validation standards and tuned to the TW12 constraints above. Here is what the drawing package covers and how the process runs from first survey to approval.
A wraparound extension is what happens when a rear extension and a side return are designed together rather than as two separate projects: the new build wraps around the back corner of the house, turning a galley kitchen and a small rear room into one continuous kitchen, dining and living space running the full width of the plot. It is the most ambitious single-storey option most London terraces and semi-detached houses have, and because it reshapes almost the entire ground floor, it needs careful structural and drainage planning as well as a confident planning application.
DrawingsDirect draws wraparound extensions for full planning and building regulations, with structural calculations for the L-shaped frame and any drainage diversion produced in-house by our MCIAT-chartered team, on a fixed fee. If your project is a single-storey rear addition or a side infill on its own, see our Rear Extension and Side Return Extension pages; if you also want a second storey, see Double Storey Extension Drawings.
What makes a wraparound extension different from a rear or side return alone?
A rear extension adds depth at the back of the house; a side return adds width down the alley; a wraparound does both at once, so the new floor area turns the corner of the original building rather than sitting against just one wall. The result is typically the largest open-plan space a single-storey extension can deliver, but it also means more of the original external wall is removed and more of the roof is new, which raises the structural and drainage stakes compared with either extension on its own. Homeowners who start out planning a rear extension or a side return alone often move to a wraparound once they see how little extra it costs to combine the two, since much of the groundwork, roof structure and glazing is shared between them rather than duplicated.
Do wraparound extensions need full planning permission in London?
Almost always, yes. Permitted development allowances are calculated on combined additions to the original house, and a wraparound's depth plus width together generally exceed the volume and footprint limits that apply to a rear extension or side extension considered separately. A Lawful Development Certificate route is rarely viable for a genuine wraparound.
Conservation area status and Article 4 directions, common across the terraced streets where wraparound extensions are most popular, remove permitted development rights further still, so we design every wraparound on the assumption it will go through full householder planning.
| Route | What it covers | Typical fee |
|---|---|---|
| Full planning permission | Required for almost all wraparound extensions given the combined footprint | Full Planning pack ~£1,600–£2,400 |
| Planning + Building Regulations (structural) | Combined pack including structural calculations for the L-shaped frame and drainage diversion | Planning + Building Regs pack ~£2,200–£3,850 |
| Rear extension alone (comparison) | Smaller single-storey addition, may qualify for permitted development | see Rear Extension Drawings, from £1,100 |
| Side return alone (comparison) | Widens the kitchen only, keeps garden depth unchanged | see Side Return Extension Drawings, from £1,400 |
Wraparound Extension Drawings in Hampton TW12 — FAQs
How much does a wraparound extension cost to design in London?+
Does a wraparound extension always need planning permission?+
Do I need an architect for a wraparound extension?+
Will I need a Party Wall Agreement for a wraparound extension?+
How long does it take to get wraparound extension drawings?+
Do I need planning permission for an extension in Richmond?+
My Richmond home is near the river — does flood risk affect my application?+
What does Richmond's Article 4 coverage mean in practice?+
How long does Richmond Council take to decide?+
How much do planning drawings cost in Richmond?+
Get your free Hampton planning assessment
Tell us your Hampton (TW12) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.