Wraparound Extension Drawings in Collier Row RM5
Fixed-fee, MCIAT-chartered wraparound extension drawings for Collier Row (RM5) homeowners — London Borough of Havering validation and local constraints handled from the start.
Collier Row (RM5) took shape as an interwar suburb of Romford, expanding through the 1920s and 1930s across former Essex farmland. It is a planned residential district rather than a historic village core, with predominantly semi-detached housing, so almost every householder project here is an extension or loft on one of those consistent interwar pairs.
There is no conservation area covering Collier Row — that is a genuine, verified fact, not an omission. Its planning character is instead shaped by the uniformity of its interwar suburban roads and by the London Borough of Havering's householder design expectations, which favour keeping the semi-detached rhythm, the gaps between pairs and the original materials intact. We treat that suburban cohesion, rather than a conservation designation, as the reference point when we design an extension.
Demand for rear extensions, two-storey side extensions and hip-to-gable lofts is steady across roads like Mawney Road, Silvermere Avenue and Victoria Avenue, where regular plots and gardens are typical. We check each property's permitted-development position against Havering's borough-wide controls first, then prepare drawings that either stay within permitted development or are ready to validate as a full householder application.
Planning in Collier Row (RM5): what to know before you apply
Because Collier Row's suburban roads repeat so consistently, Havering assess extensions against the established semi-detached pattern, so matching original brick, render and roof form and preserving the gap between pairs matters more than on a mixed-typology road. There is no conservation area and no local Article 4 direction, so many houses retain permitted development rights for rear and loft work — but the finite gardens and shared building lines mean depth, height and neighbour impact are the points a householder application is judged on.
Typical Collier Row housing stock
Predominantly interwar semi-detached houses on planned suburban roads, with postwar and modern infill on regular gardened plots. The consistent pairs and generous front and rear gardens are what makes rear extensions, side extensions and hip-to-gable loft conversions the common projects here.
Streets we regularly draw for in Collier Row
Collier Row Road · Lodge Lane · White Hart Lane · Clockhouse Lane · Mawney Road · Lawns Way · Mashiters Hill · Carter Drive · Ravenswood Close · Hunter's Grove · Silvermere Avenue · Victoria Avenue
Wraparound Extension Drawings for Collier Row (RM5) homes: the package and the process
Every wraparound extension drawings we prepare for an Collier Row property is drawn to London Borough of Havering’s validation standards and tuned to the RM5 constraints above. Here is what the drawing package covers and how the process runs from first survey to approval.
A wraparound extension is what happens when a rear extension and a side return are designed together rather than as two separate projects: the new build wraps around the back corner of the house, turning a galley kitchen and a small rear room into one continuous kitchen, dining and living space running the full width of the plot. It is the most ambitious single-storey option most London terraces and semi-detached houses have, and because it reshapes almost the entire ground floor, it needs careful structural and drainage planning as well as a confident planning application.
DrawingsDirect draws wraparound extensions for full planning and building regulations, with structural calculations for the L-shaped frame and any drainage diversion produced in-house by our MCIAT-chartered team, on a fixed fee. If your project is a single-storey rear addition or a side infill on its own, see our Rear Extension and Side Return Extension pages; if you also want a second storey, see Double Storey Extension Drawings.
What makes a wraparound extension different from a rear or side return alone?
A rear extension adds depth at the back of the house; a side return adds width down the alley; a wraparound does both at once, so the new floor area turns the corner of the original building rather than sitting against just one wall. The result is typically the largest open-plan space a single-storey extension can deliver, but it also means more of the original external wall is removed and more of the roof is new, which raises the structural and drainage stakes compared with either extension on its own. Homeowners who start out planning a rear extension or a side return alone often move to a wraparound once they see how little extra it costs to combine the two, since much of the groundwork, roof structure and glazing is shared between them rather than duplicated.
Do wraparound extensions need full planning permission in London?
Almost always, yes. Permitted development allowances are calculated on combined additions to the original house, and a wraparound's depth plus width together generally exceed the volume and footprint limits that apply to a rear extension or side extension considered separately. A Lawful Development Certificate route is rarely viable for a genuine wraparound.
Conservation area status and Article 4 directions, common across the terraced streets where wraparound extensions are most popular, remove permitted development rights further still, so we design every wraparound on the assumption it will go through full householder planning.
| Route | What it covers | Typical fee |
|---|---|---|
| Full planning permission | Required for almost all wraparound extensions given the combined footprint | Full Planning pack ~£1,600–£2,400 |
| Planning + Building Regulations (structural) | Combined pack including structural calculations for the L-shaped frame and drainage diversion | Planning + Building Regs pack ~£2,200–£3,850 |
| Rear extension alone (comparison) | Smaller single-storey addition, may qualify for permitted development | see Rear Extension Drawings, from £1,100 |
| Side return alone (comparison) | Widens the kitchen only, keeps garden depth unchanged | see Side Return Extension Drawings, from £1,400 |
Wraparound Extension Drawings in Collier Row RM5 — FAQs
How much does a wraparound extension cost to design in London?+
Does a wraparound extension always need planning permission?+
Do I need an architect for a wraparound extension?+
Will I need a Party Wall Agreement for a wraparound extension?+
How long does it take to get wraparound extension drawings?+
Do I need planning permission to extend a house in Collier Row?+
Is Collier Row in a conservation area?+
How much do planning and building-regulation drawings cost for a Collier Row extension?+
Get your free Collier Row planning assessment
Tell us your Collier Row (RM5) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.