MCIAT chartered drawings · Fixed fees across all 33 London boroughs

Free 2026 London Planning ReportWraparound Extension Drawings in Bromley

Detached London brick house with garage and driveway, characteristic of Bromley's suburban plots
Bromley · London

Wraparound Extension Drawings in Bromley

Fixed-fee, MCIAT-chartered wraparound extension drawings for Bromley homeowners — London Borough of Bromley validation and local constraints handled from the start.

Free Bromley planning assessment

Tell us your Bromley address and project. A fixed quote and free planning appraisal land within one working day.

No obligation · No spam · Reply within 1 working day

As London's largest borough by area, Bromley offers the generous interwar detached and semi-detached plots that make substantial rear and double-storey extensions genuinely viable. The housing stock runs from suburban semis around Beckenham, Penge and West Wickham to larger detached homes and edge-of-London properties toward Orpington, Hayes and Chislehurst. The right Bromley application is usually about maximising a large plot within policy rather than squeezing a tight terrace, and the room to build is exactly why so many owners here extend rather than move.

Two constraints shape what is achievable. Green-belt designation across the borough's outer edges restricts the scale of additions on properties toward Orpington and Chislehurst, where extensions are assessed against strict limits on disproportionate additions to the original dwelling. Conservation control in Chislehurst, Keston, Hayes, Park Langley and Bromley Town governs materials and design in those areas. Bromley has no borough-wide Article 4 direction affecting typical householder permitted development, so detached homes here often retain fuller rights than inner-London terraces, which we always check first.

We prepare Bromley planning drawings that use the available plot fully while respecting green-belt and conservation constraints, confirming permitted development limits for detached and semi-detached homes before we draw and evidencing green-belt cases carefully where they apply. Because the plots allow larger schemes, we design to the project rather than a standard template, and we agree a fixed fee up front, typically around 30% below an architect's charge for the same council-accepted drawings, with free redraws until Bromley approves. The council determines most householder applications within the statutory eight-week period once validated, so a complete, correctly scaled, validation-first submission is the best way to hold that timescale.

Detached London brick house with garage and driveway, characteristic of Bromley's suburban plots
Isometric illustration of a Bromley home extension design
Proposed floor plan
Bromley

Planning in Bromley: what to know before you apply

Bromley has no borough-wide Article 4 direction affecting typical householder permitted development; the binding constraints are green-belt policy on outer properties and conservation-area control in Chislehurst, Keston and Bromley Town. Detached homes here often retain fuller permitted development rights than inner-London terraces.

Typical Bromley housing stock

Large interwar detached and semi-detached houses with generous plots, plus green-belt and edge-of-London properties toward Orpington and Chislehurst.

Areas we regularly draw for in Bromley

Bromley · Beckenham · Orpington · Chislehurst · Penge · Hayes · West Wickham

Wraparound Extension Drawings for Bromley homes: the package and the process

Every wraparound extension drawings we prepare for a Bromley property is drawn to London Borough of Bromley’s validation standards and tuned to the local constraints above. Here is what the drawing package covers and how the process runs from first survey to approval.

A wraparound extension is what happens when a rear extension and a side return are designed together rather than as two separate projects: the new build wraps around the back corner of the house, turning a galley kitchen and a small rear room into one continuous kitchen, dining and living space running the full width of the plot. It is the most ambitious single-storey option most London terraces and semi-detached houses have, and because it reshapes almost the entire ground floor, it needs careful structural and drainage planning as well as a confident planning application.

DrawingsDirect draws wraparound extensions for full planning and building regulations, with structural calculations for the L-shaped frame and any drainage diversion produced in-house by our MCIAT-chartered team, on a fixed fee. If your project is a single-storey rear addition or a side infill on its own, see our Rear Extension and Side Return Extension pages; if you also want a second storey, see Double Storey Extension Drawings.

What makes a wraparound extension different from a rear or side return alone?

A rear extension adds depth at the back of the house; a side return adds width down the alley; a wraparound does both at once, so the new floor area turns the corner of the original building rather than sitting against just one wall. The result is typically the largest open-plan space a single-storey extension can deliver, but it also means more of the original external wall is removed and more of the roof is new, which raises the structural and drainage stakes compared with either extension on its own. Homeowners who start out planning a rear extension or a side return alone often move to a wraparound once they see how little extra it costs to combine the two, since much of the groundwork, roof structure and glazing is shared between them rather than duplicated.

Do wraparound extensions need full planning permission in London?

Almost always, yes. Permitted development allowances are calculated on combined additions to the original house, and a wraparound's depth plus width together generally exceed the volume and footprint limits that apply to a rear extension or side extension considered separately. A Lawful Development Certificate route is rarely viable for a genuine wraparound.

Conservation area status and Article 4 directions, common across the terraced streets where wraparound extensions are most popular, remove permitted development rights further still, so we design every wraparound on the assumption it will go through full householder planning.

Wraparound extension planning routes
RouteWhat it coversTypical fee
Full planning permissionRequired for almost all wraparound extensions given the combined footprintFull Planning pack ~£1,600–£2,400
Planning + Building Regulations (structural)Combined pack including structural calculations for the L-shaped frame and drainage diversionPlanning + Building Regs pack ~£2,200–£3,850
Rear extension alone (comparison)Smaller single-storey addition, may qualify for permitted developmentsee Rear Extension Drawings, from £1,100
Side return alone (comparison)Widens the kitchen only, keeps garden depth unchangedsee Side Return Extension Drawings, from £1,400
FAQ

Wraparound Extension Drawings in Bromley — FAQs

How much does a wraparound extension cost to design in London?+
Wraparound extension drawings start from £2,200, covering full planning permission and structural design for the combined frame. Adding building regulations and construction detail brings the package to the Planning + Building Regs band, up to around £3,850, fixed and agreed upfront.
Does a wraparound extension always need planning permission?+
In almost every case, yes. The combined depth and width of a rear and side return together generally exceed permitted development limits, so we design wraparound projects on the assumption a full householder planning application is needed.
Do I need an architect for a wraparound extension?+
No. DrawingsDirect is an MCIAT-chartered architectural technologist practice, producing the same council-accepted drawings and structural coordination as an architect, for a fixed fee typically around 30% lower, with one team responsible for both the rear and side return elements rather than two separately briefed designers.
Will I need a Party Wall Agreement for a wraparound extension?+
Usually, because the side return element of a wraparound typically builds against or close to the boundary with the neighbouring property. We prepare the drawings your Party Wall surveyor needs alongside the planning application, timed so the notice period runs in parallel with the council's determination rather than adding to your overall timescale.
How long does it take to get wraparound extension drawings?+
Drawings are typically ready around 7 days from survey. A householder planning application then has a statutory 8-week determination period once submitted.
Do I need planning permission for an extension in Bromley?+
Bromley has no borough-wide Article 4 direction affecting typical householder permitted development, so its detached and semi-detached homes often keep fuller rights than inner-London terraces — larger rear and single-storey extensions can qualify. The binding constraints are green-belt policy on outer properties and conservation control in Chislehurst, Keston and Bromley Town. We check both and can confirm permitted development with a Lawful Development Certificate.
Can I build a bigger extension because Bromley plots are larger?+
Often, yes. Bromley's generous interwar plots make substantial rear and double-storey extensions viable where an inner-London terrace could not accommodate them. The limit is usually policy rather than space — green belt restricts scale on outer properties, and conservation areas control design. We design to use the plot fully within those limits, checking permitted-development allowances for detached homes first.
How does green-belt designation affect my Bromley project?+
On green-belt properties toward Orpington, Chislehurst and the borough's edges, extensions are assessed against strict limits on disproportionate additions to the original dwelling. It does not rule out an extension, but scale and siting matter and the case must be evidenced carefully. We confirm whether your property is green belt and design a scheme that stays within policy.
How long does Bromley Council take to decide?+
Bromley determines most householder applications within the statutory eight-week period once validated. As London's largest borough by area, its casework spans suburban semis to green-belt properties, so a complete, correctly scaled submission is the best way to avoid a validation query and keep to that timescale.
How much do planning drawings cost in Bromley?+
We quote a fixed fee upfront, typically around 30% below an architect's charge for the same council-accepted drawings, with free redraws until Bromley approves. Because plots here allow larger schemes, the fee tracks the project's complexity — a single-storey rear differs from a double-storey or a green-belt case — and we confirm it once we understand your plans.
Free Fixed Quote

Get your free Bromley planning assessment

Tell us your Bromley address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.