MCIAT chartered drawings · Fixed fees across all 33 London boroughs

Free 2026 London Planning ReportSide Return Extension Drawings in Old Malden KT4

Loft conversion with skylights in an interwar Old Malden KT4 house, planned for Royal Borough of Kingston upon Thames approval
Old Malden · KT4 · Kingston

Side Return Extension Drawings in Old Malden KT4

Fixed-fee, MCIAT-chartered side return extension drawings for Old Malden (KT4) homeowners — Royal Borough of Kingston upon Thames validation and local constraints handled from the start.

Free Old Malden planning assessment

Tell us your Old Malden (KT4) address and project. A fixed quote and free planning appraisal land within one working day.

No obligation · No spam · Reply within 1 working day

Old Malden in KT4 is unusual for the area: a genuine historic village core around its medieval parish church and Plough Green, ringed by a comfortable interwar suburb of detached and semi-detached family houses. Most projects on the suburban avenues are rear extensions, two-storey side additions and loft conversions built to Royal Borough of Kingston upon Thames standards.

Homes within or beside the Old Malden conservation area face tighter control over materials, elevations and any demolition, so schemes there need a conservation-led design. We balance the extra space owners want with the village setting, and prepare planning and building-control drawings that Kingston's officers can approve first time.

Loft conversion with skylights in an interwar Old Malden KT4 house, planned for Royal Borough of Kingston upon Thames approval
Isometric illustration of a Old Malden KT4 home side return extension drawings design
Proposed floor plan
Old Malden KT4

Planning in Old Malden (KT4): what to know before you apply

There is no published householder Article 4 direction for Old Malden, so many suburban houses retain permitted-development rights; the principal constraint is the Old Malden conservation area covering the historic core, where front, roof and material changes need planning permission. Tree preservation orders on mature plots can also shape foundation and layout decisions.

Typical Old Malden housing stock

Old Malden pairs a small historic village core around the medieval church and Plough Green with a broad interwar suburb of detached and semi-detached houses on curving avenues. The suburban streets support rear and two-storey side extensions and loft conversions, while the older core demands a more sensitive conservation-led approach.

Streets we regularly draw for in Old Malden

Raleigh Drive · Collingwood Avenue · Oakdene Drive · Southwood Drive

Side Return Extension Drawings for Old Malden (KT4) homes: the package and the process

Every side return extension drawings we prepare for an Old Malden property is drawn to Royal Borough of Kingston upon Thames’s validation standards and tuned to the KT4 constraints above. Here is what the drawing package covers and how the process runs from first survey to approval.

Behind most London terraces sits a narrow side alley, a metre or so wide, running from the front boundary to the back garden. A side return extension builds into that alley at ground floor, pushing the kitchen wall out to line up with the rest of the house and topping the new space with a glazed or pitched roof — often the single biggest transformation available to a galley kitchen without touching the garden at all. Because the alley typically sits hard against next door's boundary wall, this is also the extension type most likely to involve your neighbour directly, both through the planning application and through the Party Wall process.

DrawingsDirect draws side return extensions for full planning, coordinates the Party Wall paperwork your neighbour will need to see, and produces the structural calculations for the beam that carries the new roof, all under one MCIAT-chartered team and one fixed fee. If you are also extending the rear at the same time, our Wraparound Extension page covers the combined project.

Do I need planning permission for a side return extension in London?

Permitted development rights for side extensions are narrower than for rear extensions: they generally cap the extension at a single storey, restrict its width to no more than half the width of the original house, and limit its height. In practice, a full-depth side return running the length of a Victorian or Edwardian terrace usually exceeds one or more of these limits, so most side return projects are drawn and submitted as a full householder planning application.

Conservation area status and Article 4 directions, common across inner London terraces, remove permitted development rights for side extensions entirely in many streets, reinforcing the need for a planning application. We check your property's status before drawing.

What does a side return extension involve?

A side return infills the alley at ground floor level, structurally opening the original flank wall of the kitchen into the new space so the two areas read as one room. Unlike a rear extension, which is bounded on three sides by your own garden, a side return is bounded on one long side by the neighbouring property, which shapes almost every decision in the design, from where the roof glazing sits to how deep the new foundations need to go.

  • New flank wall built out to align with the rear of the house, following the boundary line
  • Original external wall between kitchen and alley opened up and supported on a steel or glulam beam
  • Roof over the new space either glazed in full, glazed in a strip along the boundary for a 'light well' effect, or pitched and tiled to match the main roof
  • Kitchen re-planned across the combined footprint, often incorporating an island once the room widens
Side return project options
PackageWhat it coversTypical fee
Side return, planning onlyFull householder planning application drawings for the infillFull Planning pack ~£1,600–£2,400
Side return, planning + Building RegulationsAdds structural calculations, Party Wall drawings and construction detailPlanning + Building Regs pack ~£2,200–£3,850
Side return + rear extension (wraparound)Combines both extensions into one L-shaped ground floorsee Wraparound Extension Drawings
Measured survey onlyA measured existing floor-plan set for your own architect, surveyor or builderfrom £450
FAQ

Side Return Extension Drawings in Old Malden KT4 — FAQs

How much does a side return extension cost to design in London?+
Side return drawings start from £1,400. The final fee depends on whether you commission planning drawings alone or a combined planning and building regulations package with structural calculations, all fixed and agreed upfront.
Can I build a side return under permitted development?+
Rarely for a full-width, full-depth side return. Permitted development for side extensions is limited on width and storeys, and most Victorian and Edwardian terraces sit in conservation areas that remove these rights anyway, so a full planning application is the usual route. We still check your specific property first, since some semi-detached and detached houses outside conservation areas retain more generous side-extension allowances.
When do I need to serve Party Wall notice on my neighbour?+
Before work starts, and ideally once your drawings and structural design are settled, since the notice needs accurate dimensions. We can prepare the supporting drawings alongside your planning application so both processes run in parallel.
Do I need an architect for a side return extension?+
No. DrawingsDirect is an MCIAT-chartered architectural technologist practice, so you get the same council-accepted drawings as an architect, for a fixed fee typically around 30% lower, with structural calculations produced in-house.
How long does a side return extension take to design and approve?+
Drawings are typically ready around 7 days from survey. A householder planning application then has a statutory 8-week determination period, running alongside your Party Wall notice period.
Do I need planning permission for an extension in Kingston?+
The interwar semis of New Malden, Chessington and Tolworth often keep permitted development rights for rear extensions and lofts, so a full application isn't always needed. Conservation areas such as Surbiton, Coombe and the town centre, and riverside flood-zone constraints, can restrict this. We check your address first and can confirm permitted development with a Lawful Development Certificate.
My Kingston home is near the river — does flood risk affect my plans?+
It can. Riverside plots near Kingston lie within the Thames flood zone, and the council expects flood-risk and finished-floor-level considerations to be addressed for works there. We evidence these within the application so the council can validate and approve without repeated revisions.
Can I build a larger extension on a Coombe plot?+
Often, yes. The substantial detached houses on the Coombe hill sit on generous plots that make larger rear and double-storey extensions viable, subject to design and amenity policy. We design to use the plot fully within permitted-development allowances or a well-evidenced full application, checking the limits for detached homes first.
How long does the Royal Borough of Kingston take to decide?+
Kingston determines most householder applications within the statutory eight-week period once validated; conservation and riverside cases can involve additional consultation. We prepare submissions to the council's validation checklist to avoid the drawing queries that cause most delays.
How much do planning drawings cost in Kingston?+
We agree a fixed fee before starting, typically around 30% below an architect's fee for the same council-accepted drawings, with free redraws until Kingston approves. A suburban semi extension and a riverside or Coombe scheme differ in the evidence required, so we quote once we understand your address and project rather than by the hour.
Free Fixed Quote

Get your free Old Malden planning assessment

Tell us your Old Malden (KT4) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.