MCIAT chartered drawings · Fixed fees across all 33 London boroughs

Free 2026 London Planning ReportSide Return Extension Drawings in Hillingdon UB10

Loft conversion with skylights in a 1930s Hillingdon UB10 semi-detached house
Hillingdon · UB10 · Hillingdon

Side Return Extension Drawings in Hillingdon UB10

Fixed-fee, MCIAT-chartered side return extension drawings for Hillingdon (UB10) homeowners — London Borough of Hillingdon validation and local constraints handled from the start.

Free Hillingdon planning assessment

Tell us your Hillingdon (UB10) address and project. A fixed quote and free planning appraisal land within one working day.

No obligation · No spam · Reply within 1 working day

UB10 spans two distinct worlds: the historic village cores of Ickenham and Hillingdon Village, and the large belt of 1930s suburban semis and detached houses around them where most rear and loft projects happen. On the suburban stock the design conversation is about matching established roofline and frontage patterns, which Hillingdon's guidance sets out clearly.

Inside either village conservation area the emphasis shifts to protecting period character around St Giles and St John the Baptist churches, so materials, rooflines and boundary treatments face tighter control. Because the two conservation-area boundaries are compact, we confirm exactly where a UB10 property falls before choosing a permitted-development or full-application route.

Loft conversion with skylights in a 1930s Hillingdon UB10 semi-detached house
Isometric illustration of a Hillingdon UB10 home side return extension drawings design
Proposed floor plan
Hillingdon UB10

Planning in Hillingdon (UB10): what to know before you apply

Most UB10 householder work sits on interwar suburban housing outside the conservation areas, where Hillingdon has well-established expectations for rear depth, side returns and dormers. The Ickenham Village and Hillingdon Village conservation areas are the exceptions — there, heritage-led design and usually a full application are the right approach.

Typical Hillingdon housing stock

Two protected village centres — Ickenham around St Giles Church and Hillingdon Village around St John the Baptist — of period cottages and Victorian houses, ringed by the substantial 1930s semi-detached and detached suburban stock that makes up most of the wider UB10 postcode.

Streets we regularly draw for in Hillingdon

Swakeleys Road · Austin's Lane · Royal Lane · Vine Lane

Side Return Extension Drawings for Hillingdon (UB10) homes: the package and the process

Every side return extension drawings we prepare for an Hillingdon property is drawn to London Borough of Hillingdon’s validation standards and tuned to the UB10 constraints above. Here is what the drawing package covers and how the process runs from first survey to approval.

Behind most London terraces sits a narrow side alley, a metre or so wide, running from the front boundary to the back garden. A side return extension builds into that alley at ground floor, pushing the kitchen wall out to line up with the rest of the house and topping the new space with a glazed or pitched roof — often the single biggest transformation available to a galley kitchen without touching the garden at all. Because the alley typically sits hard against next door's boundary wall, this is also the extension type most likely to involve your neighbour directly, both through the planning application and through the Party Wall process.

DrawingsDirect draws side return extensions for full planning, coordinates the Party Wall paperwork your neighbour will need to see, and produces the structural calculations for the beam that carries the new roof, all under one MCIAT-chartered team and one fixed fee. If you are also extending the rear at the same time, our Wraparound Extension page covers the combined project.

Do I need planning permission for a side return extension in London?

Permitted development rights for side extensions are narrower than for rear extensions: they generally cap the extension at a single storey, restrict its width to no more than half the width of the original house, and limit its height. In practice, a full-depth side return running the length of a Victorian or Edwardian terrace usually exceeds one or more of these limits, so most side return projects are drawn and submitted as a full householder planning application.

Conservation area status and Article 4 directions, common across inner London terraces, remove permitted development rights for side extensions entirely in many streets, reinforcing the need for a planning application. We check your property's status before drawing.

What does a side return extension involve?

A side return infills the alley at ground floor level, structurally opening the original flank wall of the kitchen into the new space so the two areas read as one room. Unlike a rear extension, which is bounded on three sides by your own garden, a side return is bounded on one long side by the neighbouring property, which shapes almost every decision in the design, from where the roof glazing sits to how deep the new foundations need to go.

  • New flank wall built out to align with the rear of the house, following the boundary line
  • Original external wall between kitchen and alley opened up and supported on a steel or glulam beam
  • Roof over the new space either glazed in full, glazed in a strip along the boundary for a 'light well' effect, or pitched and tiled to match the main roof
  • Kitchen re-planned across the combined footprint, often incorporating an island once the room widens
Side return project options
PackageWhat it coversTypical fee
Side return, planning onlyFull householder planning application drawings for the infillFull Planning pack ~£1,600–£2,400
Side return, planning + Building RegulationsAdds structural calculations, Party Wall drawings and construction detailPlanning + Building Regs pack ~£2,200–£3,850
Side return + rear extension (wraparound)Combines both extensions into one L-shaped ground floorsee Wraparound Extension Drawings
Measured survey onlyA measured existing floor-plan set for your own architect, surveyor or builderfrom £450
FAQ

Side Return Extension Drawings in Hillingdon UB10 — FAQs

How much does a side return extension cost to design in London?+
Side return drawings start from £1,400. The final fee depends on whether you commission planning drawings alone or a combined planning and building regulations package with structural calculations, all fixed and agreed upfront.
Can I build a side return under permitted development?+
Rarely for a full-width, full-depth side return. Permitted development for side extensions is limited on width and storeys, and most Victorian and Edwardian terraces sit in conservation areas that remove these rights anyway, so a full planning application is the usual route. We still check your specific property first, since some semi-detached and detached houses outside conservation areas retain more generous side-extension allowances.
When do I need to serve Party Wall notice on my neighbour?+
Before work starts, and ideally once your drawings and structural design are settled, since the notice needs accurate dimensions. We can prepare the supporting drawings alongside your planning application so both processes run in parallel.
Do I need an architect for a side return extension?+
No. DrawingsDirect is an MCIAT-chartered architectural technologist practice, so you get the same council-accepted drawings as an architect, for a fixed fee typically around 30% lower, with structural calculations produced in-house.
How long does a side return extension take to design and approve?+
Drawings are typically ready around 7 days from survey. A householder planning application then has a statutory 8-week determination period, running alongside your Party Wall notice period.
Do I need planning permission for a loft conversion in Hillingdon?+
Hillingdon's Metro-land semis and detached houses in Ruislip, Eastcote and Ickenham suit hip-to-gable and dormer lofts, which frequently qualify as permitted development within the volume limits. The exceptions are the conservation areas — Ruislip Village, Uxbridge and Northwood — and green-belt land toward the Colne Valley. We check your address and can confirm permitted development with a Lawful Development Certificate.
How does the Colne Valley green belt affect my Hillingdon project?+
On green-belt properties toward the western edge of the borough, extensions are assessed against strict limits on disproportionate additions to the original dwelling. It does not rule out an extension, but scale and siting matter and the case must be evidenced carefully. We confirm whether your property is green belt and design a scheme that stays within policy.
Does proximity to Heathrow affect my plans?+
It can toward the south of the borough, where aircraft-noise considerations may influence habitable-room and glazing design. We evidence these considerations within the application where they apply so the council can validate and approve without repeated revisions.
How long does Hillingdon Council take to decide?+
Hillingdon determines most householder applications within the statutory eight-week period once validated; green-belt and conservation cases can involve additional consultation. We prepare Hillingdon submissions to the council's validation checklist to avoid the drawing queries that cause most delays.
How much do planning drawings cost in Hillingdon?+
We work to a fixed fee agreed upfront, usually around 30% below an architect's charge for the same council-accepted drawings, with free redraws until Hillingdon approves. A dormer loft, a suburban extension and a green-belt case differ in the evidence required, so we confirm the fee once we understand your project rather than billing by the hour.
Free Fixed Quote

Get your free Hillingdon planning assessment

Tell us your Hillingdon (UB10) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.