
Side Return Extension Drawings in Edmonton N9
Fixed-fee, MCIAT-chartered side return extension drawings for Edmonton (N9) homeowners — London Borough of Enfield validation and local constraints handled from the start.
Edmonton (N9) in Enfield is a Victorian working-class suburb of tight two-storey terraces, and most homeowners here are after a rear or side-return kitchen extension or a rear-dormer loft to add space without moving off a well-connected street.
The Church Street, Edmonton conservation area protects the historic core around All Saints church and its listed buildings, so if your property sits inside or beside the boundary we check that line first and steer materials and detailing before deciding between permitted development and a full householder application.


Planning in Edmonton (N9): what to know before you apply
Most rear extensions and loft conversions outside the conservation area proceed under permitted development or a lawful-development certificate. Inside the Church Street boundary, or near the listed buildings, expect a full householder application with careful attention to brick, slate and window detail.
Typical Edmonton housing stock
Late-19th-century two-storey terraces and cottages around the medieval All Saints parish church, threaded with interwar semis and some postwar redevelopment along the busier road frontages.
Streets we regularly draw for in Edmonton
Church Street · Fore Street · Bury Street West · Plevna Road
Side Return Extension Drawings for Edmonton (N9) homes: the package and the process
Every side return extension drawings we prepare for an Edmonton property is drawn to London Borough of Enfield’s validation standards and tuned to the N9 constraints above. Here is what the drawing package covers and how the process runs from first survey to approval.
Behind most London terraces sits a narrow side alley, a metre or so wide, running from the front boundary to the back garden. A side return extension builds into that alley at ground floor, pushing the kitchen wall out to line up with the rest of the house and topping the new space with a glazed or pitched roof — often the single biggest transformation available to a galley kitchen without touching the garden at all. Because the alley typically sits hard against next door's boundary wall, this is also the extension type most likely to involve your neighbour directly, both through the planning application and through the Party Wall process.
DrawingsDirect draws side return extensions for full planning, coordinates the Party Wall paperwork your neighbour will need to see, and produces the structural calculations for the beam that carries the new roof, all under one MCIAT-chartered team and one fixed fee. If you are also extending the rear at the same time, our Wraparound Extension page covers the combined project.
Do I need planning permission for a side return extension in London?
Permitted development rights for side extensions are narrower than for rear extensions: they generally cap the extension at a single storey, restrict its width to no more than half the width of the original house, and limit its height. In practice, a full-depth side return running the length of a Victorian or Edwardian terrace usually exceeds one or more of these limits, so most side return projects are drawn and submitted as a full householder planning application.
Conservation area status and Article 4 directions, common across inner London terraces, remove permitted development rights for side extensions entirely in many streets, reinforcing the need for a planning application. We check your property's status before drawing.
What does a side return extension involve?
A side return infills the alley at ground floor level, structurally opening the original flank wall of the kitchen into the new space so the two areas read as one room. Unlike a rear extension, which is bounded on three sides by your own garden, a side return is bounded on one long side by the neighbouring property, which shapes almost every decision in the design, from where the roof glazing sits to how deep the new foundations need to go.
- New flank wall built out to align with the rear of the house, following the boundary line
- Original external wall between kitchen and alley opened up and supported on a steel or glulam beam
- Roof over the new space either glazed in full, glazed in a strip along the boundary for a 'light well' effect, or pitched and tiled to match the main roof
- Kitchen re-planned across the combined footprint, often incorporating an island once the room widens
| Package | What it covers | Typical fee |
|---|---|---|
| Side return, planning only | Full householder planning application drawings for the infill | Full Planning pack ~£1,600–£2,400 |
| Side return, planning + Building Regulations | Adds structural calculations, Party Wall drawings and construction detail | Planning + Building Regs pack ~£2,200–£3,850 |
| Side return + rear extension (wraparound) | Combines both extensions into one L-shaped ground floor | see Wraparound Extension Drawings |
| Measured survey only | A measured existing floor-plan set for your own architect, surveyor or builder | from £450 |
Side Return Extension Drawings in Edmonton N9 — FAQs
How much does a side return extension cost to design in London?+
Can I build a side return under permitted development?+
When do I need to serve Party Wall notice on my neighbour?+
Do I need an architect for a side return extension?+
How long does a side return extension take to design and approve?+
Do I need planning permission for a loft or extension in Enfield?+
How does green-belt land affect my Enfield project?+
What does Enfield's borough-wide HMO Article 4 direction affect?+
How long does Enfield Council take to decide?+
How much do planning drawings cost in Enfield?+
Get your free Edmonton planning assessment
Tell us your Edmonton (N9) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.