Kitchen extension interior with rear glazing in a Barkingside IG6 inter-war semi, London Borough of Redbridge

Barkingside · IG6 · Redbridge

Side Return Extension Drawings in Barkingside IG6

Fixed-fee, MCIAT-chartered side return extension drawings for Barkingside (IG6) homeowners — London Borough of Redbridge validation and local constraints handled from the start.

Barkingside (IG6) is a largely inter-war suburb, so most of the district's rear extensions, lofts and side infills sit on ordinary 1920s and 1930s semi-detached and terraced stock outside any heritage designation. That gives many IG6 houses reasonable permitted-development scope for household projects.

At its heart, though, is the Barnardo's Village conservation area on Tanners Lane — the surviving part of Dr Barnardo's Girls' Village Home, a horseshoe of Grade II-listed cottage homes built between 1876 and 1895 around a village green. Anything affecting those listed cottages or their setting needs listed-building consent as well as planning permission, a far tighter process than the surrounding streets.

Proposed floor plan

Barkingside IG6

Barkingside (IG6) — planning at a glance

Council: London Borough of Redbridge
Postcode district: IG6
Planning portal: View the Redbridge planning portal
Housing stock: Mainly 1920s-1930s suburban semis and terraces typical of outer Redbridge, wrapped around the Barnardo's Village conservation area on Tanners Lane — a horseshoe of Grade II-listed cottage homes built for Dr Barnardo between 1876 and 1895 around a village green, with the Children's Church and Cairns House.
Article 4: London Borough of Redbridge does not publish its Article 4 directions to the national planning register, so permitted development rights in Barkingside (IG6) can’t be confirmed from open data alone — we check the direction schedule with the council before recommending a route, as part of the fixed fee. Redbridge does not publish its Article 4 directions to the national dataset, so for IG6 we confirm the Barnardo's Village conservation-area control against the council's own mapping rather than planning.data.gov.uk.
Conservation: Barnardo's Village Homes
Sample streets: Tanners Lane · Barnardo Drive · Horns Road · Fremantle Road · Mossford Green
Local constraints: Barnardo's Village conservation area — twenty-two surviving Grade II-listed cottage homes plus the listed church, lodge, fountain and boundary walls set around the Village Green off Tanners LaneListed-building consent required for any alteration touching the cottage homes or their curtilage, over and above conservation-area controlGroup-value heritage setting where new development around the Village Green edges is closely assessed for scale and materials

Planning in Barkingside (IG6): what to know before you apply

Redbridge keeps its Article 4 directions off planning.data.gov.uk, so we verify each IG6 address against the council's conservation-area and listed-building layers directly. The Barnardo's Village conservation area carries both conservation-area control and Grade II listings, so projects there are exceptional; across the wider inter-war suburb, standard rear and loft work is generally well supported.

Typical Barkingside housing stock

Mainly 1920s-1930s suburban semis and terraces typical of outer Redbridge, wrapped around the Barnardo's Village conservation area on Tanners Lane — a horseshoe of Grade II-listed cottage homes built for Dr Barnardo between 1876 and 1895 around a village green, with the Children's Church and Cairns House.

Streets we regularly draw for in Barkingside

Tanners Lane · Barnardo Drive · Horns Road · Fremantle Road · Mossford Green

Side Return Extension Drawings for Barkingside (IG6) homes: the package and the process

Every side return extension drawings we prepare for an Barkingside property is drawn to London Borough of Redbridge’s validation standards and tuned to the IG6 constraints above. Here is what the drawing package covers and how the process runs from first survey to approval.

Behind most London terraces sits a narrow side alley, a metre or so wide, running from the front boundary to the back garden. A side return extension builds into that alley at ground floor, pushing the kitchen wall out to line up with the rest of the house and topping the new space with a glazed or pitched roof — often the single biggest transformation available to a galley kitchen without touching the garden at all. Because the alley typically sits hard against next door's boundary wall, this is also the extension type most likely to involve your neighbour directly, both through the planning application and through the Party Wall process.

DrawingsDirect draws side return extensions for full planning, coordinates the Party Wall paperwork your neighbour will need to see, and produces the structural calculations for the beam that carries the new roof, all under one MCIAT-chartered team and one fixed fee. If you are also extending the rear at the same time, our Wraparound Extension page covers the combined project.

Do I need planning permission for a side return extension in London?

Permitted development rights for side extensions are narrower than for rear extensions: they generally cap the extension at a single storey, restrict its width to no more than half the width of the original house, and limit its height. In practice, a full-depth side return running the length of a Victorian or Edwardian terrace usually exceeds one or more of these limits, so most side return projects are drawn and submitted as a full householder planning application.

Conservation area status and Article 4 directions, common across inner London terraces, remove permitted development rights for side extensions entirely in many streets, reinforcing the need for a planning application. We check your property's status before drawing.

What does a side return extension involve?

A side return infills the alley at ground floor level, structurally opening the original flank wall of the kitchen into the new space so the two areas read as one room. Unlike a rear extension, which is bounded on three sides by your own garden, a side return is bounded on one long side by the neighbouring property, which shapes almost every decision in the design, from where the roof glazing sits to how deep the new foundations need to go.

New flank wall built out to align with the rear of the house, following the boundary line
Original external wall between kitchen and alley opened up and supported on a steel or glulam beam
Roof over the new space either glazed in full, glazed in a strip along the boundary for a 'light well' effect, or pitched and tiled to match the main roof
Kitchen re-planned across the combined footprint, often incorporating an island once the room widens

Side return project options
Package	What it covers	Typical fee
Side return, planning only	Full householder planning application drawings for the infill	Full Planning pack ~£1,600–£2,400
Side return, planning + Building Regulations	Adds structural calculations, Party Wall drawings and construction detail	Planning + Building Regs pack ~£2,200–£3,850
Side return + rear extension (wraparound)	Combines both extensions into one L-shaped ground floor	see Wraparound Extension Drawings
Measured survey only	A measured existing floor-plan set for your own architect, surveyor or builder	from £450

Also in Barkingside IG6

Planning Permission Planning Drawings Architectural Drawings Building Regulations Drawings Loft Conversion Drawings Side Return Extension Drawings across Redbridge Side Return Extension Drawings across London

FAQ

Side Return Extension Drawings in Barkingside IG6 — FAQs

How much does a side return extension cost to design in London?+

Side return drawings start from £1,400. The final fee depends on whether you commission planning drawings alone or a combined planning and building regulations package with structural calculations, all fixed and agreed upfront.

Can I build a side return under permitted development?+

Rarely for a full-width, full-depth side return. Permitted development for side extensions is limited on width and storeys, and most Victorian and Edwardian terraces sit in conservation areas that remove these rights anyway, so a full planning application is the usual route. We still check your specific property first, since some semi-detached and detached houses outside conservation areas retain more generous side-extension allowances.

When do I need to serve Party Wall notice on my neighbour?+

Before work starts, and ideally once your drawings and structural design are settled, since the notice needs accurate dimensions. We can prepare the supporting drawings alongside your planning application so both processes run in parallel.

Do I need an architect for a side return extension?+

No. DrawingsDirect is an MCIAT-chartered architectural technologist practice, so you get the same council-accepted drawings as an architect, for a fixed fee typically around 30% lower, with structural calculations produced in-house.

How long does a side return extension take to design and approve?+

Drawings are typically ready around 7 days from survey. A householder planning application then has a statutory 8-week determination period, running alongside your Party Wall notice period.

Do I need planning permission for a loft conversion in Redbridge?+

On the Edwardian and interwar semis of Wanstead, Woodford and Barkingside, hip-to-gable and dormer lofts frequently qualify as permitted development within the volume limits, so a full application isn't always needed. Conservation areas such as Wanstead, Snaresbrook and the Ilford Garden Suburb restrict this. We check your street first and can confirm permitted development with a Lawful Development Certificate.

What does Redbridge's borough-wide HMO Article 4 direction affect?+

Redbridge applies a borough-wide Article 4 direction removing permitted development rights for change of use to an HMO (C3 to C4), so a conversion to a house in multiple occupation needs a full application anywhere in the borough. It doesn't affect a standard family extension or loft, but we confirm whether it applies to your intended use before advising.

What does the council expect for an extension in Wanstead or Woodford?+

The council pays close attention to preserving the rhythm and building line of its Edwardian and interwar suburban streets, so extensions are expected to respect the established line and roof form. Many single-storey rear extensions still fall within permitted development; where a full application is needed, we design to the borough's residential guidance so it validates and approves without repeated revisions.

How long does Redbridge Council take to decide?+

Redbridge determines most householder applications within the statutory eight-week period once validated; conservation cases can attract additional consultation. The commonest delay is a validation query, so we prepare Redbridge submissions to the council's checklist with correctly scaled existing and proposed drawings and a location plan.

How much do planning drawings cost in Redbridge?+

We work to a fixed fee agreed upfront, usually around 30% below an architect's charge for the same council-accepted drawings, with free redraws until Redbridge approves. The figure depends on the scheme — a dormer loft differs from a double-storey extension — so we confirm it once we understand your project rather than billing by the hour.

Free Fixed Quote

Get your free Barkingside planning assessment

Tell us your Barkingside (IG6) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.