Grand Italianate stucco terraces and mansion flats in the South Kensington SW7 museum quarter, where Kensington and Chelsea Council governs basement and internal works

South Kensington · SW7 · Kensington & Chelsea

Rear Extension Drawings in South Kensington SW7

Fixed-fee, MCIAT-chartered rear extension drawings for South Kensington (SW7) homeowners — Royal Borough of Kensington and Chelsea validation and local constraints handled from the start.

South Kensington (SW7) is the borough's museum quarter — vast Italianate stucco terraces along Queen's Gate and the Thurloe and Boltons estates, together with grand mansion flats. Much of the stock is listed, so schemes here focus on internal remodelling, roof and rear alterations, and deep basement works rather than alterations to the protected street frontages.

Because SW7 combines dense conservation-area coverage with widespread listing, we prepare measured drawings and heritage-led justification to the Royal Borough of Kensington and Chelsea's standard, managing listed-building consent and the borough's exacting limits on basement depth and construction logistics.

Proposed floor plan

South Kensington SW7

South Kensington (SW7) — planning at a glance

Council: Royal Borough of Kensington and Chelsea
Postcode district: SW7
Planning portal: View the Kensington & Chelsea planning portal
Housing stock: SW7 is the museum-quarter heart of the borough — monumental Italianate stucco terraces along Queen's Gate and the Thurloe and Boltons estates, plus substantial red-brick mansion blocks. A large share is listed, so work runs to internal reconfiguration, roof and rear alterations, and heavily engineered basement schemes rather than changes to the imposing frontages.
Article 4: Royal Borough of Kensington and Chelsea does not publish its Article 4 directions to the national planning register, so permitted development rights in South Kensington (SW7) can’t be confirmed from open data alone — we check the direction schedule with the council before recommending a route, as part of the fixed fee. The museum-quarter conservation areas and the very high proportion of listed terraces around Queen's Gate strip out most householder permitted-development rights
Conservation: Queen's GateThurloe/Smith's CharityThe BoltonsBrompton
Sample streets: Queen's Gate · Walton Street · Prince Consort Road · Gledhow Gardens
Local constraints: The whole quarter lies within conservation areas such as Queen's Gate, Thurloe/Smith's Charity and The Boltons, removing most permitted-development rightsMany of the grand stucco terraces are listed, so internal and external works commonly require listed-building consentRBKC's strict basement (subterranean development) policy tightly controls the depth, extent and construction impact of the basements common hereNeighbour-amenity and party-wall pressures are intense given the scale and close spacing of the terraces

Planning in South Kensington (SW7): what to know before you apply

No published householder Article 4 direction applies, yet conservation-area designation across SW7 already removes most permitted-development rights and listed-building consent is frequently required. RBKC's subterranean development policy typically restricts basements to a single storey with strict construction-management conditions.

Typical South Kensington housing stock

SW7 is the museum-quarter heart of the borough — monumental Italianate stucco terraces along Queen's Gate and the Thurloe and Boltons estates, plus substantial red-brick mansion blocks. A large share is listed, so work runs to internal reconfiguration, roof and rear alterations, and heavily engineered basement schemes rather than changes to the imposing frontages.

Streets we regularly draw for in South Kensington

Queen's Gate · Walton Street · Prince Consort Road · Gledhow Gardens

Rear Extension Drawings for South Kensington (SW7) homes: the package and the process

Every rear extension drawings we prepare for an South Kensington property is drawn to Royal Borough of Kensington and Chelsea’s validation standards and tuned to the SW7 constraints above. Here is what the drawing package covers and how the process runs from first survey to approval.

A single-storey rear extension is the most common way London homeowners add space, usually taking the form of an open-plan kitchen-diner that opens onto the garden through bi-fold or sliding doors, with rooflights or a roof lantern bringing daylight deep into the plan. Because depth and height are tightly controlled by permitted development rules and by the 45-degree rule that protects neighbouring windows, the design work sits as much in checking what the council will allow as in drawing what you want.

DrawingsDirect draws rear extensions for permitted development, the larger home extension prior-approval scheme and full householder planning, with structural calculations for the opening and roof produced in-house by our MCIAT-chartered team. If your project also involves widening the kitchen sideways or adding a second storey, see our Side Return, Wraparound and Double Storey Extension pages — many London rear extensions grow into one of those during design.

Do I need planning permission for a rear extension in London?

Many single-storey rear extensions qualify as permitted development, meaning no planning application is needed, provided depth, height and materials stay within set limits. That changes if your property sits in a conservation area or is subject to an Article 4 direction, both of which can remove permitted development rights across a street or borough — in that case a full householder planning application is required regardless of size.

Even where an extension qualifies, most homeowners obtain a Lawful Development Certificate to confirm that status in writing before building — useful for mortgage lenders, buyers and Building Control. We check your property against your borough's constraints before recommending a route.

How deep can a single-storey rear extension go?

Depth is the main constraint on a rear extension, and it depends on your house type and whether you use standard permitted development or the larger home extension scheme.

Permitted development

Standard permitted development allows a single-storey rear extension up to 3 metres deep for terraced and semi-detached houses, or 4 metres for detached houses, generally with eaves height limited to match or stay close to the existing house.

Larger home extension scheme

The prior-approval scheme extends this to 6 metres for terraced and semi-detached houses and 8 metres for detached houses. Your council writes to affected neighbours; if none object within the notification period, approval follows without a full planning application. If an objection is raised, the council assesses the impact on neighbouring light and outlook itself, rather than automatically refusing, so a well-considered design still has a good chance of approval.

Rear extension routes at a glance
Route	When it applies	Typical fee
Permitted development (Lawful Development Certificate)	Depth within 3m (terraced/semi) or 4m (detached), height and materials within PD limits	PD/LDC pack ~£950–£1,450
Larger home extension (prior approval)	Depth up to 6m (terraced/semi) or 8m (detached), with neighbour notification	from £1,100
Full householder planning permission	Extension exceeds PD/larger-home limits, or the property is in a conservation area with an Article 4 direction	Full Planning pack ~£1,600–£2,400
Planning + Building Regulations (structural)	Combined planning and construction-ready pack with structural calculations for the opening and roof	Planning + Building Regs pack ~£2,200–£3,850

Also in South Kensington SW7

Planning Permission Planning Drawings Architectural Drawings Building Regulations Drawings Loft Conversion Drawings Rear Extension Drawings across Kensington & Chelsea Rear Extension Drawings across London

FAQ

Rear Extension Drawings in South Kensington SW7 — FAQs

How much does a rear extension cost to design in London?+

Rear extension drawings start from £1,100, with the final fee set by the route your extension takes — permitted development, prior approval or full planning — and whether you need building regulations and structural calculations bundled in. The fee is fixed and agreed upfront.

Do I need an architect for a rear extension?+

No. DrawingsDirect is an MCIAT-chartered architectural technologist practice, producing the same council-accepted drawings as an architect for a fixed fee typically around 30% lower.

How long does it take to get rear extension drawings?+

Drawings are typically ready around 7 days from survey. Once submitted, councils have a statutory 8-week period to determine a standard householder planning application.

What is the 45-degree rule?+

It is a daylight test many London councils apply to check that a rear extension does not block too much light to a neighbour's nearest window, measured as a line drawn at 45 degrees from that window. We check it before submission, not after a refusal.

Will I need a Party Wall Agreement for a rear extension?+

Only if your foundations or new walls sit on or near the boundary with a neighbouring property. A straightforward rear extension set within your own plot often does not trigger the Party Wall etc. Act 1996, unlike a Side Return or Wraparound extension, which usually does.

Do I need planning permission for works in Kensington & Chelsea?+

Almost always. Near-comprehensive conservation-area coverage and a high density of listed buildings mean a full planning application — and often listed-building consent — is usually required even for modest works. Permitted development can rarely be assumed here. We confirm the exact designations and listing status for your address before any design begins.

Can I build a basement in Kensington & Chelsea?+

Within limits. The borough's basements policy is nationally known for restricting new basements — generally to a single storey — and controlling excavation extent, alongside a basement impact assessment. A basement can still be viable, but it must be designed to the policy from the outset. We confirm what your site allows and evidence the scheme accordingly.

My home is listed — what consent do I need?+

Listed-building consent is usually required alongside or instead of planning permission, and internal as well as external changes can be controlled. Given the borough's extensive listed-building coverage across Kensington, Chelsea and the mews, we screen listing status first and prepare the heritage-led drawings and justification the council expects.

How long does the Royal Borough take to decide?+

The council determines most householder applications within the statutory eight-week period once validated, though listed-building, basement and conservation cases frequently attract additional consultation. We prepare submissions to the borough's exacting validation and design standards to avoid the drawing queries that cause most delays.

How much do planning drawings cost in Kensington & Chelsea?+

We agree a fixed fee before starting, typically around 30% below an architect's fee for the same council-accepted drawings, with free redraws until the council approves. Heritage-led and listed-building schemes require more evidence than a standard extension, so we quote once we understand your address and scheme rather than by the hour.

Free Fixed Quote

Get your free South Kensington planning assessment

Tell us your South Kensington (SW7) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.