Rear extension on a late-Victorian artisan terrace in Sands End SW6 near Imperial Wharf, London Borough of Hammersmith and Fulham

Sands End · SW6 · Hammersmith & Fulham

Planning Drawings in Sands End SW6

Fixed-fee, MCIAT-chartered planning drawings for Sands End (SW6) homeowners — London Borough of Hammersmith & Fulham validation and local constraints handled from the start.

Sands End (SW6) is Fulham's riverside corner, where grids of late-Victorian artisan terraces meet the modern Imperial Wharf development, in the London Borough of Hammersmith & Fulham. The character is genuinely mixed, so projects run from side-return and rear extensions and lofts on the terraces to internal alterations and fit-outs in the newer riverside flats.

The Sands End and Imperial Square & Gasworks conservation areas protect the historic terraced core and the area's industrial-riverside heritage, with Hurlingham and Moore Park at the edges, so frontage and roofline changes on the older houses are controlled. Flat alterations bring freeholder consent and party-wall matters on top of the planning position, so we establish whether an address is period house or leasehold flat before drawing to Hammersmith & Fulham's standards.

Proposed floor plan

Sands End SW6

Sands End (SW6) — planning at a glance

Council: London Borough of Hammersmith & Fulham
Postcode district: SW6
Planning portal: View the Hammersmith & Fulham planning portal
Housing stock: A mixed riverside district — grids of late-Victorian artisan terraces around Sands End Lane and Hugon Road sitting alongside the modern Imperial Wharf flats — so the work ranges from side-return and rear house extensions to leasehold flat alterations and fit-outs.
Article 4: London Borough of Hammersmith & Fulham does not publish its Article 4 directions to the national planning register, so permitted development rights in Sands End (SW6) can’t be confirmed from open data alone — we check the direction schedule with the council before recommending a route, as part of the fixed fee. No householder Article 4 direction is published for SW6 Sands End — the Sands End and Imperial Square & Gasworks conservation areas are the defining local controls.
Conservation: Sands EndHurlinghamImperial Square & GasworksMoore Park
Sample streets: Hugon Road · Breer Street · Dymock Street · Daisy Lane
Local constraints: Sands End conservation area covering the historic terraced core, where frontages and rooflines are controlledImperial Square & Gasworks conservation area reflecting the area's industrial-riverside heritage near Imperial WharfMix of period houses and modern leasehold flats, where flat alterations bring freeholder consent and party-wall considerations separate from planningHurlingham and Moore Park conservation areas bleeding in across the wider SW6 setting near the river

Planning in Sands End (SW6): what to know before you apply

SW6 Sands End has no published householder Article 4 direction, but the Sands End and Imperial Square & Gasworks conservation areas cover the terraced core and riverside heritage, with Hurlingham and Moore Park nearby, so frontage and roofline changes are controlled. Modern flats do not carry the permitted development rights of houses, so alterations there are assessed as full planning alongside freeholder consent.

Typical Sands End housing stock

A mixed riverside district — grids of late-Victorian artisan terraces around Sands End Lane and Hugon Road sitting alongside the modern Imperial Wharf flats — so the work ranges from side-return and rear house extensions to leasehold flat alterations and fit-outs.

Streets we regularly draw for in Sands End

Hugon Road · Breer Street · Dymock Street · Daisy Lane

Planning Drawings for Sands End (SW6) homes: the package and the process

Every planning drawings we prepare for an Sands End property is drawn to London Borough of Hammersmith & Fulham’s validation standards and tuned to the SW6 constraints above. Here is what the drawing package covers and how the process runs from first survey to approval.

Planning drawings are the scale drawings a London council uses to judge your application: existing and proposed floor plans, elevations, sections and site plans that show the design, scale and neighbour impact of your project. DrawingsDirect produces complete, validation-ready planning drawing sets for extensions, lofts and conversions across London.

What is included in a planning drawing set?

A council will only validate an application that contains the right drawings at the right scale. Our standard planning set covers everything a London validation team expects.

Site location plan (1:1250) and block plan (1:500)
Existing floor plans, elevations and sections
Proposed floor plans, elevations and sections
Roof plans where relevant, with heights and materials annotated
A design and access or heritage statement where the borough requires one

How are planning drawings different from building regulations drawings?

Planning drawings show what the building will look like and how it sits in its context. Building regulations drawings show how it will be built safely — structure, insulation, fire escape and drainage. Most projects need both; our Complete package covers the two together with structural calculations coordinated in-house.

What a London planning drawing set contains
Drawing	Typical scale	What it shows
Site location plan	1:1250	The property in its street context, site edged red
Block plan	1:500	The building's footprint and position in the plot
Floor plans (existing & proposed)	1:100 / 1:50	Room layout, walls, openings and the proposed changes
Elevations (existing & proposed)	1:100 / 1:50	Each face of the building and how it changes
Sections	1:100 / 1:50	A cut through showing heights, levels and roof form

Also in Sands End SW6

Planning Permission Architectural Drawings Building Regulations Drawings Loft Conversion Drawings House Extension Drawings Planning Drawings across Hammersmith & Fulham Planning Drawings across London

FAQ

Planning Drawings in Sands End SW6 — FAQs

What scale should London planning drawings be?+

Site location plans are 1:1250, block plans 1:500, and floor plans, elevations and sections are typically 1:100 or 1:50. We format every drawing to your specific borough's requirements.

Do I need an architect to produce planning drawings?+

No. MCIAT-chartered architectural technologists produce the same council-accepted planning drawings with the same professional accountability, and councils assess the drawings, not the author's job title.

How many revisions are included in the fee?+

All of them. The fee is fixed and we redraw free until your council approves — revisions requested by a planning officer never cost you extra.

Can you draw from my existing plans?+

We can work from existing measured drawings, but for accuracy we usually carry out a laser survey so the proposed set matches your property exactly.

Do planning drawings guarantee approval?+

No drawing can guarantee a decision, but drawing to the local plan and validation checklist maximises your odds — and we redraw free until approval.

Do I need planning permission for a side-return extension in Hammersmith & Fulham?+

On the Victorian and Edwardian terraces of Fulham and Shepherd's Bush a single-storey side-return or rear extension can fall within permitted development, so a full application isn't always required. Conservation areas across Fulham, Brackenbury and Ravenscourt Park, and the Peterborough Estate, restrict this. We check your street's designation first and can confirm permitted development with a Lawful Development Certificate.

Will I need a Basement Impact Assessment for a basement in Hammersmith & Fulham?+

Likely, yes. The council applies a basement policy requiring a basement impact assessment for below-ground works, covering structural stability, drainage and groundwater. Basement extensions are common on these terraces, so if you are considering one we flag the requirement early and coordinate the structural input so the application is complete when submitted.

What is special about the Peterborough Estate 'Lion houses'?+

The Peterborough Estate's distinctive red-brick 'Lion houses' carry strong conservation control over their external character, so alterations are expected to respect the estate's materials and detailing. We design to that character and prepare a full householder application where permitted development doesn't apply, which is the reliable route to approval there.

How long does Hammersmith & Fulham take to decide?+

The council determines most householder applications within the statutory eight-week period once validated; basement and conservation cases can involve additional consultation. Because the terraces are party-wall-sensitive, we prepare submissions to the borough's residential extension and basement guidance to avoid the drawing queries that cause most delays.

How much do planning drawings cost in Hammersmith & Fulham?+

We agree a fixed fee before we start, typically around 30% below an architect's fee for the same council-accepted drawings, with free redraws until the council approves. A side-return, a loft and a basement differ in complexity, so we quote once we have seen your address and project rather than by the hour.

Free Fixed Quote

Get your free Sands End planning assessment

Tell us your Sands End (SW6) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.