MCIAT chartered drawings · Fixed fees across all 33 London boroughs

Free 2026 London Planning ReportNew Build Drawings in Wimbledon Village SW19

Open-plan kitchen extension interior in a Wimbledon Village SW19 villa near the Common, London Borough of Merton
Wimbledon Village · SW19 · Merton

New Build Drawings in Wimbledon Village SW19

Fixed-fee, MCIAT-chartered new build drawings for Wimbledon Village (SW19) homeowners — London Borough of Merton validation and local constraints handled from the start.

Free Wimbledon Village planning assessment

Tell us your Wimbledon Village (SW19) address and project. A fixed quote and free planning appraisal land within one working day.

No obligation · No spam · Reply within 1 working day

Wimbledon Village (SW19) is one of Merton's most tightly conservation-controlled neighbourhoods: the historic core and the villa roads sloping toward the Common sit within a run of conservation areas. Whether a property falls inside one of those boundaries is the single biggest factor in how a rear extension, basement or loft is designed and assessed here.

Because so much of the housing is substantial detached and semi-detached villas rather than repeating terraces, each scheme is judged on its own townscape merits — scale, roof form, materials and how it reads from the street all matter more than usual. We map a Wimbledon Village property against the conservation boundaries and any tree constraints first, then prepare drawings to Merton's residential and conservation guidance.

Open-plan kitchen extension interior in a Wimbledon Village SW19 villa near the Common, London Borough of Merton
Isometric illustration of a Wimbledon Village SW19 home new build drawings design
Proposed floor plan
Wimbledon Village SW19

Planning in Wimbledon Village (SW19): what to know before you apply

SW19 has no published householder Article 4 direction in Wimbledon Village, but the overlapping conservation areas mean permitted development cannot be assumed across most of the neighbourhood, and mature protected trees frequently influence where an extension or outbuilding can sit.

Typical Wimbledon Village housing stock

A premium historic village on the hill above the Common — Georgian and early-Victorian houses along the High Street with large detached and semi-detached villas set in generous plots on the roads running down toward Wimbledon Common.

Streets we regularly draw for in Wimbledon Village

Ricards Road · Bernard Gardens · Parkwood Road · Alwyne Road

New Build Drawings for Wimbledon Village (SW19) homes: the package and the process

Every new build drawings we prepare for an Wimbledon Village property is drawn to London Borough of Merton’s validation standards and tuned to the SW19 constraints above. Here is what the drawing package covers and how the process runs from first survey to approval.

Designing a new dwelling on an infill or backland plot in London is a longer and more technically demanding journey than an extension or loft conversion — it involves establishing whether the plot can support a new home at all, securing full planning permission against a borough's density, design and amenity policies, and then producing a building regulations and structural package detailed enough to actually build from. DrawingsDirect delivers all of this as one coordinated service: feasibility, full planning drawings, building regulations drawings and structural calculations, produced in-house rather than passed between separate architects, engineers and drafters who each need briefing and coordinating separately.

London infill and backland sites bring specific challenges that a straightforward extension does not: the impact of a new dwelling on neighbouring daylight and sunlight, privacy and overlooking, the character and density of the surrounding streetscape, and access, parking and refuse arrangements for a new independent home. Getting an early, honest read on these issues — before a full application is drawn and submitted — is often the difference between a scheme that is approved and one that is refused and has to be reworked. We assess feasibility and, where useful, prepare pre-application advice before committing to a full drawing set.

Is my plot suitable for a new build in London?

A feasibility assessment looks at plot size and shape, access, existing boundary conditions, relevant planning policy for the borough, and the likely impact of a new dwelling on neighbouring properties before any design work begins. Infill plots — a gap between existing buildings on a street — and backland plots — a garden or yard site behind existing houses, reached by a shared access — each raise different issues: infill schemes are usually judged on how well they match the scale, spacing and character of the street, while backland schemes are judged heavily on overlooking, garden loss for neighbours, and whether the access arrangement is acceptable. A feasibility study gives an honest view of whether a scheme is likely to succeed before you commit to full drawings.

What does pre-application advice add to a new build project?

Pre-application advice is a formal, paid process most London boroughs offer, where planning officers give written feedback on a proposed scheme before a full application is submitted. For a new build — where the principle of development itself is often the main issue, not just the design details — this feedback can be invaluable: it surfaces concerns around density, massing, daylight and sunlight or heritage context early enough to be addressed in the drawings, rather than discovered for the first time as a refusal reason months into a full application. We prepare and submit pre-application enquiries as part of the new build service where it is likely to strengthen the eventual planning application.

New build project stages
StageWhat it establishesTypical fee guide
FeasibilityWhether the plot can support a new dwelling and the likely constraintsQuoted individually, from within the £2,500 new build fee
Pre-application adviceWritten borough feedback on the scheme before a full applicationQuoted individually alongside the planning fee
Full planning drawingsThe complete drawing set submitted for planning permissionFrom £2,500
Building regs and structuralConstruction-ready drawings and calculations for buildingFrom £2,200–£3,850, quoted once planning is settled
FAQ

New Build Drawings in Wimbledon Village SW19 — FAQs

How much do new build drawings cost in London?+
New build drawings start from £2,500 for feasibility and a full planning drawing set on a straightforward infill or backland plot, with building regulations and structural drawings quoted separately once the planning design is agreed.
Can any garden or backland plot be built on in London?+
Not necessarily — backland and garden plots are assessed on access, overlooking, loss of garden amenity for neighbours and borough policy, and a feasibility assessment gives an honest early view of whether a scheme is likely to be supported.
Do I need pre-application advice before a full new build application?+
It is not mandatory, but for a new dwelling — where the principle of development is often the main issue — pre-application advice can surface concerns early enough to address them in the design, reducing the risk of refusal.
Do you handle building regulations and structural drawings for a new build, or only planning?+
Both — the full new build service covers planning, building regulations and structural drawings from one in-house team, so the design stays consistent from feasibility through to construction-ready drawings.
How long does a new build project take from feasibility to planning permission?+
This varies with site complexity and whether pre-application advice is sought, but a full planning application is determined within the statutory period the borough applies to the application type, once submitted via the Planning Portal.
Do I need planning permission for an extension in Merton?+
The interwar semis of Raynes Park and Morden often keep permitted development rights for rear extensions and lofts, so a full application isn't always needed. Conservation areas such as Wimbledon Village, Wimbledon Common and the John Innes estate at Merton Park restrict this. We check your street's designation first and can confirm permitted development with a Lawful Development Certificate.
What is special about building at the John Innes estate in Merton Park?+
The John Innes estate is a planned Arts-and-Crafts conservation area with a distinctive character the council protects closely — materials, proportions and rooflines are all controlled. Permitted development is often restricted there, so we design to the estate's character and prepare a full, context-led application, which is the reliable route to approval.
What do Merton's HMO Article 4 directions affect?+
In designated wards, an Article 4 direction removes permitted development for change of use to an HMO (C3 to C4), so a conversion to a house in multiple occupation needs a full application there. It doesn't affect a standard family extension, but if you are considering an HMO we confirm whether the direction covers your address and use before advising.
How long does Merton Council take to decide?+
Merton determines most householder applications within the statutory eight-week period once validated; Wimbledon and Merton Park conservation cases can involve additional consultation. We prepare submissions to the council's validation checklist to avoid the drawing queries that cause most delays.
How much do planning drawings cost in Merton?+
We agree a fixed fee before starting, typically around 30% below an architect's fee for the same council-accepted drawings, with free redraws until Merton approves. A suburban Raynes Park extension and a Wimbledon Village or Merton Park application differ in the evidence required, so we quote once we understand your address and project rather than by the hour.
Free Fixed Quote

Get your free Wimbledon Village planning assessment

Tell us your Wimbledon Village (SW19) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.