Measured Building Survey in Custom House E16
Fixed-fee, MCIAT-chartered measured building survey for Custom House (E16) homeowners — London Borough of Newham validation and local constraints handled from the start.
Custom House (E16) grew as Victorian dock-worker housing around the Royal Victoria Dock, which opened in 1855, and now sits inside the Royal Docks regeneration and Enterprise Zone. Surviving and postwar-rebuilt terraces sit alongside major new-build development around the ExCeL and the Elizabeth line, so householder work here is largely extensions and lofts on the terraced houses that line the residential streets.
There is no conservation area covering the Custom House part of E16 — that is a genuine, verified fact, not an omission. Its planning character is instead shaped by the working dockside terraced grain and the surrounding regeneration, and by the London Borough of Newham's householder design expectations, which lean on keeping original building lines, materials and roof continuity intact. We treat that terraced character, rather than a conservation designation, as the reference point when we design an extension.
Demand for rear extensions and loft conversions runs steadily across residential streets like Tollgate Road, Rogers Road and Chadwin Road, where compact terraced houses sit on modest plots. We check each property's permitted-development position against Newham's borough-wide controls first — and any surface-water drainage points given the low-lying dockside land — then prepare drawings that either stay within permitted development or are ready to validate as a full householder application.
Planning in Custom House (E16): what to know before you apply
Because Custom House is a dockside mix of surviving and rebuilt terraces set within the Royal Docks regeneration area, Newham assess extensions against the prevailing rhythm and building line of the individual residential street, so matching original brick, roof continuity and neighbour relationships matters alongside the numbers. There is no conservation area and no local Article 4 direction in the Custom House part of E16, so many terraced houses retain permitted development rights for rear and loft work — but compact plots, shared party walls and low-lying land mean depth, height, neighbour impact and drainage are the points a householder application is judged on.
Typical Custom House housing stock
A mix of surviving and postwar-rebuilt terraced housing with substantial new-build apartments across the Royal Docks regeneration area. It is the terraced houses on the residential streets, rather than the apartment blocks, that generate most of the rear-extension and loft-conversion work here.
Streets we regularly draw for in Custom House
Barrier Point Road · Tollgate Road · Rayleigh Road · Wesley Avenue · Rogers Road · Ruscoe Road · Egham Road · Chadwin Road · Cranley Road · Selby Road · Caraway Close · Eclipse Road
Measured Building Survey for Custom House (E16) homes: the package and the process
Every measured building survey we prepare for an Custom House property is drawn to London Borough of Newham’s validation standards and tuned to the E16 constraints above. Here is what the drawing package covers and how the process runs from first survey to approval.
Every accurate drawing starts with an accurate survey. Before any proposed extension, loft conversion or alteration can be designed, we need to know exactly what already exists — the true dimensions of each room, the position and size of every door and window, floor-to-ceiling heights, wall thicknesses, roof pitches and the exact shape of the plot. A measured building survey captures all of this on site using a laser distance meter, recording existing plans, elevations and sections to millimetre accuracy, rather than relying on old estate agent floor plans, a previous owner's drawings, or rough on-site guesswork.
This matters more than it might seem. A design drawn on top of an inaccurate existing survey can look correct on paper and then not actually fit once a builder is on site — a wall that is 200mm out of position, a ceiling height that is lower than assumed, or a roof pitch that does not match reality can all force a costly redesign mid-build. A fresh, laser-measured survey de-risks that from the outset: the proposed extension, loft conversion or internal alteration is designed against the real dimensions of your home, not an approximation, so what is drawn is what can actually be built.
Why does a planning or building regulations application need a measured survey?
A planning or building regulations application needs to show the existing building accurately alongside the proposed changes, so the council or Building Control can judge the impact of the work against what is actually there. Existing plans, elevations and sections drawn from an accurate measured survey give the borough confidence that the proposal has been designed against real dimensions, and give your builder a reliable set of drawings to price and build from — an application based on inaccurate or assumed dimensions risks queries, delays, or a design that does not translate cleanly on site.
What does a measured building survey capture?
The survey records everything needed to produce accurate existing drawings: internal room dimensions and floor-to-ceiling heights on every level, the position, width and height of every door and window, wall thicknesses, staircase dimensions and headroom, roof shape and pitch, chimney breasts and structural features, and the external footprint and boundary relationship of the property. Where relevant to the project, we also record ground levels, existing drainage runs and neighbouring boundary conditions.
This is captured with a laser distance meter rather than a tape measure, which keeps the survey accurate to within a few millimetres across a whole property and removes the cumulative measuring error that can creep into a hand-measured survey of a larger or more complex building.
| Output drawing | Relies on the measured survey for |
|---|---|
| Floor plans | Accurate room dimensions and layout for sale, letting or lease use |
| Planning drawings | Existing plans, elevations and sections to compare against the proposal |
| Building regulations drawings | Accurate existing structure to design technical compliance against |
| Structural calculations | True spans, floor-to-ceiling heights and existing structural elements |
Measured Building Survey in Custom House E16 — FAQs
How much does a measured building survey cost?+
How long does a measured survey take?+
Is a measured survey the same as a floor plan?+
Do I need a measured survey if I am only doing internal work?+
Can the survey be used for more than one purpose?+
Do I need planning permission to extend a house in Custom House?+
Is Custom House in a conservation area?+
How much do planning and building-regulation drawings cost for a Custom House extension?+
Get your free Custom House planning assessment
Tell us your Custom House (E16) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.