MCIAT chartered drawings · Fixed fees across all 33 London boroughs

Free 2026 London Planning ReportHouse Extension Drawings in Tower Hamlets

Georgian terraces and warehouse conversions of the kind found across Tower Hamlets' Spitalfields and Wapping
Tower Hamlets · London

House Extension Drawings in Tower Hamlets

Fixed-fee, MCIAT-chartered house extension drawings for Tower Hamlets homeowners — London Borough of Tower Hamlets validation and local constraints handled from the start.

Free Tower Hamlets planning assessment

Tell us your Tower Hamlets address and project. A fixed quote and free planning appraisal land within one working day.

No obligation · No spam · Reply within 1 working day

Tower Hamlets runs from the listed Georgian terraces of Spitalfields and the warehouse and wharf conversions of Wapping and Limehouse through the Victorian streets of Bow and Mile End to the dense purpose-built and estate housing of Bethnal Green, Poplar and Whitechapel and the towers of the Isle of Dogs. It is one of London's most heritage-dense and design-scrutinised boroughs, so the right route for an alteration or extension depends heavily on the building type and its conservation or listing status.

A high proportion of streets fall within conservation areas — Fournier Street and Elder Street in Spitalfields, Wapping Pierhead, Narrow Street in Limehouse, Victoria Park, Tredegar Square in Bow and Whitechapel Market — where permitted development is removed and even some changes of use are controlled. Spitalfields in particular carries a high density of listed Georgian terraces, where listed-building consent is usually required for many alterations, internal as well as external. Tower Hamlets also applies Article 4 directions removing permitted development for HMO conversions in parts of the borough, Thames-side flood-zone considerations run along the Wapping and Limehouse riverside, and tall-building and townscape context near the City fringe and Canary Wharf adds further design scrutiny.

We prepare Tower Hamlets planning and, where needed, listed-building submissions to the council's validation and design standards, screening conservation-area and listing constraints for your exact address before recommending a route to consent. Because the borough determines most householder applications within the statutory eight-week period once validated, we work validation-first to avoid the queries that cause most delays. The fee is fixed and agreed up front, drawings typically follow within about seven days, and we offer free redraws until the council approves — the same council-accepted drawings an architect would produce, usually at around 30% less.

Georgian terraces and warehouse conversions of the kind found across Tower Hamlets' Spitalfields and Wapping
Isometric illustration of a Tower Hamlets home extension design
Proposed floor plan
Tower Hamlets

Planning in Tower Hamlets: what to know before you apply

Tower Hamlets applies Article 4 directions to HMO conversions in parts of the borough and removes permitted development across its many conservation areas — Spitalfields, Wapping Pierhead and Tredegar Square among them. Spitalfields in particular carries a high density of listed Georgian terraces where listed-building consent is usually required. Thames flood-zone considerations apply along the riverside. We confirm the constraints for your address before drawing.

Typical Tower Hamlets housing stock

Georgian terraces around Spitalfields, warehouse and wharf conversions along the Wapping and Limehouse riverside, Victorian terraces across Bow and Mile End, and dense purpose-built and estate housing throughout the borough.

Areas we regularly draw for in Tower Hamlets

Bethnal Green · Bow · Poplar · Whitechapel · Wapping · Limehouse · Mile End · Isle of Dogs

House Extension Drawings for Tower Hamlets homes: the package and the process

Every house extension drawings we prepare for a Tower Hamlets property is drawn to London Borough of Tower Hamlets’s validation standards and tuned to the local constraints above. Here is what the drawing package covers and how the process runs from first survey to approval.

A well-drawn extension adds space and value while sailing through the council; a poorly-drawn one triggers objections and refusals. DrawingsDirect draws rear, side-return, wraparound, double-storey and basement extensions for London homes — sized to your borough's tolerances, with daylight and neighbour impact considered before the planners raise them.

Which extension types do you draw?

Every London extension is shaped by the plot, the neighbours and the borough's design guidance. We draw them all.

Rear extension

A single-storey rear extension is often permitted development within depth limits — ideal for an open-plan kitchen-diner.

Side-return

Fills the alley beside a Victorian terrace, widening the ground floor without losing garden.

Wraparound

Combines a rear and side-return extension for a transformative ground floor, usually needing planning permission.

Double-storey

Adds space above and below, subject to tighter scale and neighbour-impact scrutiny.

Basement

Creates space downward where footprint is limited, with structural and party-wall care.

Do I need planning permission for a house extension in London?

Single-storey rear extensions within permitted development limits (up to 6m for terraced/semi-detached homes under the larger-home scheme, subject to neighbour consultation) may not need a full application. Wraparounds, double-storeys and anything in a conservation area usually do. We assess your plot and recommend the right route before drawing.

Typical London extension drawing packages
ExtensionTypical routePackageFee from
Single-storey rearPermitted development / householderPlanning + building regs£1,100
Side-returnHouseholder planningPlanning + building regs + structural£1,600
WraparoundHouseholder planningFull package + structural£2,200
Double-storeyHouseholder planningFull package + structural£2,400
FAQ

House Extension Drawings in Tower Hamlets — FAQs

How far can I extend without planning permission in London?+
Under permitted development, single-storey rear extensions can reach 3m (terraced/semi) or 4m (detached), or up to 6–8m under the prior-approval larger-home scheme — but conservation areas and Article 4 directions can remove these rights. We check your property first.
Do extension drawings include structural calculations?+
Our full package includes structural drawings and calculations coordinated in-house, so your builder can price and build without waiting on an engineer.
How long do extension drawings take?+
Typically about 7 days from survey to a full drawing set delivered to your online portal.
Will my rear extension need a party wall agreement?+
If you build up to or on a shared boundary, excavate near a neighbour's foundations, or cut into a party wall for a steel, the Party Wall etc. Act 1996 usually applies. Our drawings show the works clearly so a party wall surveyor — or your neighbour — can see exactly what is proposed, which keeps that process quick.
Can I extend a house in a conservation area?+
Yes, but conservation areas and Article 4 directions commonly remove permitted development for rear and side extensions, so the work needs a full householder application designed to the council's heritage guidance. We confirm your property's designation before recommending a route.
Do I need planning permission for an extension in Tower Hamlets?+
Frequently, yes. A high proportion of the borough sits within a conservation area — Spitalfields, Wapping Pierhead and Tredegar Square among them — where permitted development is removed. On unlisted homes outside a conservation area a rear extension may still qualify. We check your address against the designations first and can confirm permitted development with a Lawful Development Certificate where it qualifies.
My Tower Hamlets property is listed — what consent do I need?+
Listed-building consent is usually required alongside or instead of planning permission, and internal as well as external changes can be controlled. The Georgian terraces around Spitalfields carry a high density of listed buildings. We screen listing status for your address first and prepare the heritage-led drawings and justification the council expects.
Can you handle a warehouse or riverside conversion in Wapping or Limehouse?+
Yes. The Wapping and Limehouse riverside carries its own townscape, conservation and flood-zone context, and conversions there are assessed against design control near the Thames. We prepare drawings that respond to that setting and evidence the flood-risk considerations, confirming the constraints for your specific building before design begins.
How long does Tower Hamlets Council take to decide?+
Tower Hamlets determines most householder applications within the statutory eight-week period once validated; listed-building, conservation and riverside cases can involve additional consultation. We prepare submissions to the council's validation and design standards to avoid the drawing queries that cause most delays.
How much do planning drawings cost in Tower Hamlets?+
We agree a fixed fee before we start, typically around 30% below an architect's fee for the same council-accepted drawings, with free redraws until the council approves. A conservation-area extension, a listed-building scheme and a riverside conversion differ in the evidence required, so we quote once we have seen your address and project rather than by the hour.
Free Fixed Quote

Get your free Tower Hamlets planning assessment

Tell us your Tower Hamlets address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.