Flat Conversion Drawings in Hammersmith & Fulham
Fixed-fee, MCIAT-chartered flat conversion drawings for Hammersmith & Fulham homeowners — London Borough of Hammersmith & Fulham validation and local constraints handled from the start.
Hammersmith & Fulham is classic terraced West London. Long Victorian and Edwardian grids across Fulham and Shepherd's Bush make side-return and rear extensions, loft conversions and basements the most requested projects, and the council's design expectations for these house types are well established. Around them sit the distinctive red-brick 'Lion houses' of the Peterborough Estate, Edwardian mansion blocks, and newer riverside development along the Thames through Sands End, with Parsons Green, Brook Green, Hammersmith and White City each adding their own grain to the borough.
The controls that matter here are layered. The council operates a basement policy requiring a basement impact assessment for below-ground works, covering structural stability, drainage and groundwater, and Thames-side flood-zone considerations apply near the river. Strong conservation control runs across Bishops Park, Peterborough Estate, Brackenbury, Ravenscourt Park, Bradmore and Crabtree, and Article 4 directions remove permitted development for HMO conversions and, in conservation areas, some basement and frontage works. We confirm exactly which of these apply to your exact address before drawing.
We draw Hammersmith & Fulham planning applications to the borough's residential extension and basement guidance, coordinating structural calculations in-house so party-wall-sensitive terraces and below-ground schemes are handled cleanly and are complete when submitted. On the dense grids we check permitted development first and confirm it with a Lawful Development Certificate where a side-return or rear extension qualifies, and on the Peterborough Estate we design to the 'Lion houses' character. The fee is fixed and agreed up front, typically around 30% below an architect's charge for the same council-accepted drawings, with free redraws until the council approves. Most householder applications are decided within the statutory eight-week period once validated, so we submit validation-first.
Planning in Hammersmith & Fulham: what to know before you apply
Hammersmith & Fulham applies a basement policy requiring a basement impact assessment for below-ground works, and controls design closely within its conservation areas and on the Peterborough Estate. Article 4 directions remove permitted development for HMO conversions in parts of the borough. We confirm the constraints for your exact address before drawing.
Typical Hammersmith & Fulham housing stock
Long grids of Victorian and Edwardian terraces across Fulham and Shepherd's Bush, the distinctive red-brick 'Lion houses' of the Peterborough Estate, Edwardian mansion blocks, and newer riverside development along the Thames.
Areas we regularly draw for in Hammersmith & Fulham
Fulham · Shepherd's Bush · Hammersmith · Parsons Green · Sands End · Brook Green · White City
Flat Conversion Drawings for Hammersmith & Fulham homes: the package and the process
Every flat conversion drawings we prepare for a Hammersmith & Fulham property is drawn to London Borough of Hammersmith & Fulham’s validation standards and tuned to the local constraints above. Here is what the drawing package covers and how the process runs from first survey to approval.
Converting a house into flats is one of the few residential projects in London that always needs planning permission, whatever the size of the property or the number of units created. Splitting a single dwelling into two or more self-contained homes is treated as development regardless of whether any external work is proposed, because the change affects how the building is used and how many households occupy it.
DrawingsDirect draws house-to-flats conversions from the first survey through to a submission-ready planning and building-regulations package. Sound insulation between units, separate escape routes, individual services and London's minimum space standards are designed in from the layout stage, not retrofitted once the council asks for them — which is a large part of why our schemes are approved first time.
Do I need planning permission to convert a house into flats?
Yes, always. Converting a single dwelling into two or more self-contained flats is a change from one home to several, and that subdivision is treated as development requiring a full planning application — there is no permitted development route that allows it, regardless of the property's size or whether the exterior changes at all. The application has to demonstrate that each flat meets space, layout, amenity and parking standards in its own right, not just that the building as a whole is being used sensibly.
Boroughs also weigh the loss of a family-sized house against their local housing policy, since converting a larger house into several flats reduces the stock of homes suited to families even as it adds smaller units. We take that policy context into account when advising on layout and unit numbers, rather than simply maximising the number of flats the floor area could technically support.
What sound insulation is required between flats?
Part E of the building regulations sets minimum sound insulation standards for the walls and floors separating flats, covering both airborne and impact sound. Where an existing house is subdivided, the drawings specify how the party floors and walls between units will be upgraded — additional layers, resilient bars, or a floating floor — and pre-completion sound testing is normally required before the flats can be signed off. Getting this detail right on the drawings from the outset matters, because retrofitting sound insulation after a failed test usually means taking up a finished floor or ceiling that has already been decorated.
| Conversion | Typical scope | Route | Fee from |
|---|---|---|---|
| House to two self-contained flats | Vertical split, separate or shared entrance | Full planning plus building regulations | £1,600 |
| House to three or more flats | Multiple units, fire strategy required | Full planning plus building regs plus structural | £2,400 |
| Flat conversion with a side or rear extension | Additional floor area added to create compliant units | Full planning plus structural calculations | £2,800 |
Flat Conversion Drawings across Hammersmith & Fulham
Flat Conversion Drawings in Hammersmith & Fulham — FAQs
Do I need planning permission to convert a house into flats?+
How much do flat conversion drawings cost in London?+
What sound insulation is required between flats?+
Does each flat need a separate fire escape?+
What is the minimum size for a flat in London?+
Do I need planning permission for a side-return extension in Hammersmith & Fulham?+
Will I need a Basement Impact Assessment for a basement in Hammersmith & Fulham?+
What is special about the Peterborough Estate 'Lion houses'?+
How long does Hammersmith & Fulham take to decide?+
How much do planning drawings cost in Hammersmith & Fulham?+
Get your free Hammersmith & Fulham planning assessment
Tell us your Hammersmith & Fulham address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.