Rear extension and loft project on a dockside terraced house in Custom House E16, in the Royal Docks area of Newham

Custom House · E16 · Newham

Flat Conversion Drawings in Custom House E16

Fixed-fee, MCIAT-chartered flat conversion drawings for Custom House (E16) homeowners — London Borough of Newham validation and local constraints handled from the start.

Custom House (E16) grew as Victorian dock-worker housing around the Royal Victoria Dock, which opened in 1855, and now sits inside the Royal Docks regeneration and Enterprise Zone. Surviving and postwar-rebuilt terraces sit alongside major new-build development around the ExCeL and the Elizabeth line, so householder work here is largely extensions and lofts on the terraced houses that line the residential streets.

There is no conservation area covering the Custom House part of E16 — that is a genuine, verified fact, not an omission. Its planning character is instead shaped by the working dockside terraced grain and the surrounding regeneration, and by the London Borough of Newham's householder design expectations, which lean on keeping original building lines, materials and roof continuity intact. We treat that terraced character, rather than a conservation designation, as the reference point when we design an extension.

Demand for rear extensions and loft conversions runs steadily across residential streets like Tollgate Road, Rogers Road and Chadwin Road, where compact terraced houses sit on modest plots. We check each property's permitted-development position against Newham's borough-wide controls first — and any surface-water drainage points given the low-lying dockside land — then prepare drawings that either stay within permitted development or are ready to validate as a full householder application.

Proposed floor plan

Custom House E16

Custom House (E16) — planning at a glance

Council: London Borough of Newham
Postcode district: E16
Planning portal: View the Newham planning portal
Housing stock: A mix of surviving and postwar-rebuilt terraced housing with substantial new-build apartments across the Royal Docks regeneration area. It is the terraced houses on the residential streets, rather than the apartment blocks, that generate most of the rear-extension and loft-conversion work here.
Article 4: No area-specific Article 4 direction is published for the Custom House part of E16; the London Borough of Newham's borough-wide permitted-development controls and householder design guidance still apply.
Sample streets: Barrier Point Road · Tollgate Road · Rayleigh Road · Wesley Avenue · Rogers Road · Ruscoe Road · Egham Road · Chadwin Road · Cranley Road · Selby Road · Caraway Close · Eclipse Road
Local constraints: A mixed dockside grain where surviving and postwar-rebuilt terraces sit close to major new-build development, so extension proposals are read against the prevailing rhythm and building line of each individual residential street rather than one uniform patternNewham's borough-wide permitted-development limits and householder design guidance govern extension depth, height and coverage — no local Article 4 direction narrows them further in the Custom House part of E16Matching original facing brick and roof tiles on terraced runs so a rear or loft addition reads as part of the original house rather than an obvious bolt-onCompact terraced plots and modest rear gardens, which constrain how deep a single-storey rear extension can go before it needs a full householder applicationTerraced forms with party walls on both sides, making party-wall relationships, roof-line continuity and overshadowing central to what gets approvedLow-lying land within the Royal Docks regeneration area near the Thames, where surface-water and flood-risk drainage considerations can bear on a householder scheme

Planning in Custom House (E16): what to know before you apply

Because Custom House is a dockside mix of surviving and rebuilt terraces set within the Royal Docks regeneration area, Newham assess extensions against the prevailing rhythm and building line of the individual residential street, so matching original brick, roof continuity and neighbour relationships matters alongside the numbers. There is no conservation area and no local Article 4 direction in the Custom House part of E16, so many terraced houses retain permitted development rights for rear and loft work — but compact plots, shared party walls and low-lying land mean depth, height, neighbour impact and drainage are the points a householder application is judged on.

Typical Custom House housing stock

A mix of surviving and postwar-rebuilt terraced housing with substantial new-build apartments across the Royal Docks regeneration area. It is the terraced houses on the residential streets, rather than the apartment blocks, that generate most of the rear-extension and loft-conversion work here.

Streets we regularly draw for in Custom House

Barrier Point Road · Tollgate Road · Rayleigh Road · Wesley Avenue · Rogers Road · Ruscoe Road · Egham Road · Chadwin Road · Cranley Road · Selby Road · Caraway Close · Eclipse Road

Flat Conversion Drawings for Custom House (E16) homes: the package and the process

Every flat conversion drawings we prepare for an Custom House property is drawn to London Borough of Newham’s validation standards and tuned to the E16 constraints above. Here is what the drawing package covers and how the process runs from first survey to approval.

Converting a house into flats is one of the few residential projects in London that always needs planning permission, whatever the size of the property or the number of units created. Splitting a single dwelling into two or more self-contained homes is treated as development regardless of whether any external work is proposed, because the change affects how the building is used and how many households occupy it.

DrawingsDirect draws house-to-flats conversions from the first survey through to a submission-ready planning and building-regulations package. Sound insulation between units, separate escape routes, individual services and London's minimum space standards are designed in from the layout stage, not retrofitted once the council asks for them — which is a large part of why our schemes are approved first time.

Do I need planning permission to convert a house into flats?

Yes, always. Converting a single dwelling into two or more self-contained flats is a change from one home to several, and that subdivision is treated as development requiring a full planning application — there is no permitted development route that allows it, regardless of the property's size or whether the exterior changes at all. The application has to demonstrate that each flat meets space, layout, amenity and parking standards in its own right, not just that the building as a whole is being used sensibly.

Boroughs also weigh the loss of a family-sized house against their local housing policy, since converting a larger house into several flats reduces the stock of homes suited to families even as it adds smaller units. We take that policy context into account when advising on layout and unit numbers, rather than simply maximising the number of flats the floor area could technically support.

What sound insulation is required between flats?

Part E of the building regulations sets minimum sound insulation standards for the walls and floors separating flats, covering both airborne and impact sound. Where an existing house is subdivided, the drawings specify how the party floors and walls between units will be upgraded — additional layers, resilient bars, or a floating floor — and pre-completion sound testing is normally required before the flats can be signed off. Getting this detail right on the drawings from the outset matters, because retrofitting sound insulation after a failed test usually means taking up a finished floor or ceiling that has already been decorated.

House-to-flats conversion drawing packages in London
Conversion	Typical scope	Route	Fee from
House to two self-contained flats	Vertical split, separate or shared entrance	Full planning plus building regulations	£1,600
House to three or more flats	Multiple units, fire strategy required	Full planning plus building regs plus structural	£2,400
Flat conversion with a side or rear extension	Additional floor area added to create compliant units	Full planning plus structural calculations	£2,800

Also in Custom House E16

Planning Permission Planning Drawings Architectural Drawings Building Regulations Drawings Loft Conversion Drawings Flat Conversion Drawings across Newham Flat Conversion Drawings across London

FAQ

Flat Conversion Drawings in Custom House E16 — FAQs

Do I need planning permission to convert a house into flats?+

Yes, always. Subdividing a single dwelling into two or more self-contained flats is treated as development in its own right, so a full planning application is required regardless of whether the exterior of the building changes.

How much do flat conversion drawings cost in London?+

Packages start from £1,600 for converting a house into two flats and rise to around £2,800 where three or more units, structural work or an extension are involved. We agree a fixed fee once we know the scope.

What sound insulation is required between flats?+

Part E of the building regulations sets minimum airborne and impact sound standards for the floors and walls separating flats, and pre-completion sound testing is normally required before the units can be signed off.

Does each flat need a separate fire escape?+

Each flat needs its own means of escape and the building needs to be fire-compartmented between units, using fire-rated floors, walls and doors and either a protected shared stairway or separate final exits.

What is the minimum size for a flat in London?+

London applies minimum internal floor areas based on bedroom and occupancy numbers, adopted from the national space standards through the London Plan. We check every proposed flat against the relevant threshold before drawing the layout.

Do I need planning permission to extend a house in Custom House?+

Not always. Many Custom House terraced houses retain permitted development rights, so a modest single-storey rear extension or a rear loft conversion can often proceed without a full planning application. Because the terraced plots are compact and sit on low-lying dockside land, we check your property's size limits, party-wall lines and any drainage points against Newham's controls first, and prepare a full householder application where the project goes beyond permitted development.

Is Custom House in a conservation area?+

No. There is no conservation area covering the Custom House part of E16. Its planning character is shaped instead by the working dockside terraced grain, the surrounding Royal Docks regeneration and Newham's householder design expectations, which favour keeping original building lines, materials and roof continuity intact when you extend.

How much do planning and building-regulation drawings cost for a Custom House extension?+

We work to fixed fees agreed before we start, with a typical turnaround of around seven days for a standard rear extension or loft on a Custom House terraced house. As a chartered architectural technologist practice we produce the same council-accepted planning and building-regulation drawings as an architect, usually for a lower fee, and include free redraws until your application is approved.

Free Fixed Quote

Get your free Custom House planning assessment

Tell us your Custom House (E16) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.