MCIAT chartered drawings · Fixed fees across all 33 London boroughs

Free 2026 London Planning ReportChange of Use Drawings in Richmond TW9

Kitchen extension inside a Georgian townhouse near Kew Green in Richmond TW9, London Borough of Richmond upon Thames
Richmond · TW9 · Richmond

Change of Use Drawings in Richmond TW9

Fixed-fee, MCIAT-chartered change of use drawings for Richmond (TW9) homeowners — London Borough of Richmond upon Thames validation and local constraints handled from the start.

Free Richmond planning assessment

Tell us your Richmond (TW9) address and project. A fixed quote and free planning appraisal land within one working day.

No obligation · No spam · Reply within 1 working day

Richmond (TW9) spans the town centre and the Kew border, layering conservation areas including Kew Green, Richmond Green, Central Richmond and Lawn Crescent across its Georgian and Victorian streets.

The Kew Green conservation area, with the Thames Path running past St Anne's churchyard and Kew Pond, protects 18th-century cottages such as Cambridge Cottages, which carry their own Article 4 direction.

Kitchen extension inside a Georgian townhouse near Kew Green in Richmond TW9, London Borough of Richmond upon Thames
Isometric illustration of a Richmond TW9 home change of use drawings design
Proposed floor plan
Richmond TW9

Planning in Richmond (TW9): what to know before you apply

TW9 houses commonly sit inside the Kew Green, Richmond Green or Central Richmond conservation areas, and streets like Cambridge Cottages carry Article 4 directions — plan for front elevations, windows and roofs to need full planning permission rather than permitted development.

Typical Richmond housing stock

Georgian yellow-brick cottages and townhouses around Kew Green and Richmond Green, with later Victorian and Edwardian terraces filling out the Kew Gardens and Lawn Crescent streets.

Streets we regularly draw for in Richmond

Kew Green · Cambridge Cottages · Lawn Crescent · Kew Foot Road · George Street · Kew Road

Change of Use Drawings for Richmond (TW9) homes: the package and the process

Every change of use drawings we prepare for an Richmond property is drawn to London Borough of Richmond upon Thames’s validation standards and tuned to the TW9 constraints above. Here is what the drawing package covers and how the process runs from first survey to approval.

A change of use — converting a house into flats, a shop into a flat, or adding a lodger room that tips a home into a small HMO — is governed by the Use Classes Order, which groups land and buildings into classes such as C3 (dwellinghouses), C4 (small shared houses) and E (commercial, business and service uses), plus a handful of uses that sit outside any class, known as sui generis. Whether you need a full planning application, a prior-approval notification, or nothing at all depends on which classes the 'before' and 'after' uses fall into, and whether your permitted development rights have been restricted locally.

DrawingsDirect prepares the drawings and supporting information a London borough needs to assess a change of use — existing and proposed floor plans, a use and amenity statement, and where relevant a parking and refuse strategy — and advises which route applies before you commit to an application. We cover conversions into flats, commercial-to-residential schemes under the prior-approval Class MA route, and other changes of use across all 33 London boroughs.

What counts as a material change of use?

Not every change in how a building is used needs planning permission — only a 'material' change, one significant enough to affect the character of the use of the land. Converting a single dwellinghouse into two or more flats is always material. Adding paying lodgers within a single household usually is not, until the household tips over into a small House in Multiple Occupation. We assess whether your proposed change crosses that threshold before recommending a route.

The Use Classes Order: C3, C4, E and sui generis

The Use Classes Order groups uses so planners, and permitted development rules, can treat similar activities consistently.

C3 — Dwellinghouses

The class covering a single household living as a single unit, including up to two people living together as a single household who are not related. Most family homes and self-contained flats fall here.

C4 — Houses in multiple occupation (small)

Covers a shared house or flat occupied by three to six unrelated people sharing basic amenities such as a kitchen or bathroom. Moving from C3 to C4 is a change of use, though it is often permitted development unless your borough has removed that right.

Class E — Commercial, business and service

A wide class combining shops, offices, gyms, cafes and other business uses that can change between each other without planning permission, but changing from Class E to residential use is a material change requiring the prior-approval or full planning route.

Sui generis

Uses that do not fit any class, including large HMOs of seven or more unrelated occupants, betting shops and drinking establishments. A change of use to or from a sui generis use normally needs planning permission.

Change of use routes for a London property
RouteWhen it appliesTypical packageFee from
Prior approval (Class MA)Class E commercial to residential, meeting the criteriaPrior-approval drawings and statement£1,200
Full planning permissionConversion into flats, HMO or use outside prior approvalPlanning + building regs£1,600–£2,400
No application neededUse falls within an existing permitted class changeDrawings for record purposes only£450
FAQ

Change of Use Drawings in Richmond TW9 — FAQs

How much do change of use drawings cost in London?+
Change of use packages typically start from £1,200, depending on whether the route is prior approval or full planning permission and how many units are involved. We agree a fixed fee before drawing begins.
What is the difference between a material change of use and general permitted development?+
A material change of use concerns what a building or piece of land is used for, while permitted development more broadly also covers physical building work. Some material changes of use are themselves permitted development, such as certain Class E to residential conversions under Class MA, but many, including converting a house into flats, are not.
How long does a change of use application take to be decided?+
A prior-approval application under Class MA is typically decided within 56 days; a full planning application follows the usual eight-week statutory period for most schemes. We prepare a complete package to avoid delays caused by missing information.
Do I need an architect for a change of use application?+
No. As an MCIAT-chartered architectural technologist practice, we prepare the same council-accepted drawings and statements an architect would, typically at a lower fee, and can submit via the Planning Portal on your behalf.
Will converting my house into flats need building regulations approval too?+
Yes. Converting a house into self-contained flats almost always triggers building regulations, covering fire separation, sound insulation between units and means of escape, in addition to any planning permission needed for the change of use.
Do I need planning permission for an extension in Richmond?+
More often than in most boroughs, yes. Richmond has some of the most extensive Article 4 coverage in London, so permitted development cannot be assumed even for modest works — many conservation areas such as Richmond Green, Teddington and Kew Green require a full application. We confirm the exact designation for your address first and design accordingly rather than relying on permitted development.
My Richmond home is near the river — does flood risk affect my application?+
It can. Much of the borough lies within the Thames flood zone, and the council expects flood-risk considerations to be addressed for works near the river in Twickenham, Richmond and Hampton. We evidence flood-risk and finished-floor-level considerations within the application so the council can validate and approve without repeated revisions.
What does Richmond's Article 4 coverage mean in practice?+
Article 4 directions remove permitted development rights across many of Richmond's conservation areas, so alterations that would be automatic elsewhere — dormers, cladding, some rear works — need a full householder application here. We design context-led drawings that respond to the borough's period townscape and river frontage, which is what carries an application to consent in Richmond.
How long does Richmond Council take to decide?+
Richmond determines most householder applications within the statutory eight-week period once validated, though conservation and riverside cases can attract additional consultation. Because so much turns on design detail here, we prepare submissions to the validation checklist with the elevations and materials the council expects, to avoid drawing queries.
How much do planning drawings cost in Richmond?+
We agree a fixed fee before starting, typically around 30% below an architect's fee for the same council-accepted drawings, with free redraws until Richmond approves. Conservation and flood-zone cases require more evidence than a standard extension, so we quote once we understand your address and scheme rather than by the hour.
Free Fixed Quote

Get your free Richmond planning assessment

Tell us your Richmond (TW9) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.